Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Requires Resubmit
Review Details: PERMANENT SIGN REVIEW v.6
Permit Number - TS-PRM-0525-00207
Review Name: PERMANENT SIGN REVIEW v.6
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 08/18/2025 | Commercial Building Standard | REQUIRES RESUBMIT | ACTIVITY NO. TS-PRM-0525-00207 ADDRESS/PARCEL: (5205 E VALENCIA RD TUCSON, AZ 85706) Submit your revised drawings along with a detailed response letter, which states how all Building Review Section comments were addressed. Please paste the review comment individually and enter your response directly below it. Please do this for every comment. Review will not proceed without the response letter. The submitted documents were incomplete and a thorough plan review could not be performed. Please be aware, new comments may arise with the next review. Should the above not followed, it may delay your approval. COMMENTS: 1. SIGNS H, I, F, and G a. Please submit the structural calculations and detail drawings. 2. Please resubmit. If you have any questions about these comments, I can be reached at Justin.Eder@tucsonaz.gov or 520-837-4976 |
||
| 07/30/2025 | Signs Standard | REQUIRES RESUBMIT | Application: 1) All dimensions must be FEET.DECIMAL - not FEET INCHES. 2) Fill in missing information on application. Signs A, B, D: 1) Notate and show location of electrical power disconnect switch. Signs F, G, H, I: 1) As an Electronic Message Device, the following must be added to the drawings: We need the manufacture of the EMC to sit down and write a letter to The City of Tucson That says the following... #1. Name of the manufacturer. #2. The EMC model number/name #3. {Model} is fully capable of lowering to 200 nits at night. #4. {Model} is FCC compliant. Sign J: 1) Label the electrical disconnect switch. 2) Per Section 7A.10.2.C.2.a.i.b, Maximum square footage for a monument sign is 50 sq ft. Please revise sign to conform to code. Location Map: 1) The minimum setback is 20' from the face of the curb. I believe this dimension is incorrect. If it is correct, the sign needs to be moved so that it meets the minimum setback requirement. |