Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit Number: TS-PRM-0523-00299
Parcel: 12510048B

Review Status: Requires Resubmit

Review Details: PERMANENT SIGN REVIEW v.1

Permit Number - TS-PRM-0523-00299
Review Name: PERMANENT SIGN REVIEW v.1
Review Status: Requires Resubmit
Review Date Reviewer's Name Type of Review Description Status Comments
05/26/2023 Signs REQUIRES RESUBMIT RE: wall signs and replacement monument sign review
For: Mitsubishi
AT: 3434 E Speedway
Sign Permit: TS-PRM-0523-00299
Date: 5/26/23
Reviewer: H. Thrall (Heather.Thrall@tucsonaz.gov)

Codes: Unified Development Code 7A Sign Standards, National Electrical Code 600, Tucson-Pima County Outdoor Lighting Code (OLC), International Building Code 2018 (IBC).

1. UDC - no comments, thank you. All signage is allowed as shown in the plan set. Minor items below are requested for the permit record.

2. NEC:
A) please provide amps pulled per sign, and check the number for the monument, thank you
B) please just add a clarifying note on each sign elevation sheet that the disconnect switch is contained within a lock out box
C) can you please triple check with the engineered construction sheets for accurate shut off switch location for the monument, as it's shown inside it - it may be, (unusual) but if so, please just add a note then kindly calling out service opening for the sign structure.
D) can you kindly add a note to each sign elevation sheet that a weep hole is provided for each sign? (It's buried in the engineering sheets.)

3) OLC - no comments, thank you.

4) IBC -
A) please have your engineer re-seal documents with 2018 IBC noted rather than 2015, and kindly just check the data to see if there's any different requirements.
B) Thank you very much for the 115 mph wind load for the replacement monument, very wise, appreciated.
C) please just add a note on sheet 4 of the sign elevation plans to see the engineering sheets for the construction details and assembly details (i.e. saddle / bolts / pipe system in existence, engineered to verify re-use of the support system for the replacement cabinet)

Please email me when your resubmittal is uploaded, and I'll pull the revision faster, thank you (Heather.Thrall@tucsonaz.gov)