Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.

Permit Number: TS-PRM-0223-00191
Parcel: 12402004B

Review Status: Requires Resubmit

Review Details: PERMANENT SIGN REVIEW v.1

Permit Number - TS-PRM-0223-00191
Review Name: PERMANENT SIGN REVIEW v.1
Review Status: Requires Resubmit
Review Date Reviewer's Name Type of Review Description Status Comments
03/07/2023 Signs REQUIRES RESUBMIT RE: low-profile freestanding sign review
For: Taco Bell
AT: 1818 E Speedway Bl
Sign permit: TS-PRM-0223-00191
Reviewer: H. Thrall (Heather.Thrall@tucsonaz.gov)
Date: 3/7/23

Codes: Unified Development Code (UDC) 7A, Sign Standards, National Electrical Coe (NEC), Tucson Pima County Outdoor Lighting Code (OLC), and International Building Code (IBC).

1) UDC:
A) Change sign label to "Low-profile sign" on plans and application
B) add street frontage for Campbell to site plan
C) clarify that the sign is in a landscape area
D) clarify whether any easements in area
E) call out the lot line along Campbell very clearly on the site plan

2) NEC / OLC
A) add all standard electrical notes: i.e. volts, amps, circuits, shut off switch, dedicate circuit to be provided and labeled at breaker panel, sign shall have all UL, manufacturer and installer stickers on it, LED color temp noted
B) add that a timer shall be provided
C) add that the timer shall shut the sign off at midnight or business closure, later applies
D) add that the sign shall not exceed 4400k color temperature internal illumination
E) indicate existing power to be used - or if new power is going to be run to it (there was an old sign here at one time)

3) IBC
A) use of hi-strength bolts is fine, but an engineer needs to sign and seal a special inspection form and then appoint a qualified special inspector for the work before the sig permit can be issued. Staff will email you a copy of the form to use.
B) indicate how cladding mounted to cabinet and or to pole

Please email me when you have resubmitted and I will pull your file for faster review. Thank you.