Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Requires Resubmit
Review Details: PERMANENT SIGN REVIEW v.1
Permit Number - TS-PRM-0123-00152
Review Name: PERMANENT SIGN REVIEW v.1
Review Status: Requires Resubmit
Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
---|---|---|---|---|---|
02/07/2023 | Signs | REQUIRES RESUBMIT | Please revise plans and resubmit updated application, construction diagrams and location map to the portal to TS-PRM-0123-00152. RE: sign review For: Wendy's / 5391 E Speedway Bl Permit: TS-PRM-0123-00152 Date: 2/7/23 Reviewer: H. Thrall (Heather.Thrall@tucsonaz.gov) Codes: Unified Development Code (UDC) 7A, Sign Standards, National Electrical Code (NEC) 600, Tucson-Pima County Outdoor Lighting Code (OLC), International Building Code (IBC) 2018. 1. UDC: A) Update 140' frontage along Speedway on the application and location plan. B) sign location aerial is blurry, please use another source C) The elevation shown on the plan set does not match the present building elevations. If they are planning to do construction to the building, that building permit needs to be submitted and approved prior to issuance of the sign permit. In that case, just update the items in these comments and wait to resubmit a bit. D) So... can you show us the change copy for the freestanding sign? Just put it in the package but do not add it to the permit app or on the valuation. E) For the pre-menu board, please make a note on the plans that it is 1 foot setback from the drive thru face of curb F) I fully acknowledge that the proposed signs are well within allowed sign area for the location. 2. NEC / OLC: A) please just add a note that the signs will turn off by midnight via the timer 3. IBC: A) If the mounting is going to change to match the current building elevation, please provide that elevation view in the pages for sign location reference and in the construction diagram, show side view with raceway (and raceway mount) and I'll re-review the mounting and electrical as well within section 2 above. B) so - the little logo cabinet... the character's hair is shown coming off the sides of the round cabinet, please just bullnose the sign edges so that the ends are not sharp. Add note "edges to be bullnosed". Thanks. If you have any questions, please email me at Heather.Thrall@tucsonaz.gov |