Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit Review Detail

Permit Number: TR-UTL-1223-03036
Parcel: 11105063L

Review Status: Requires Resubmit

Review Details: RIGHT-OF-WAY REVIEW v.2

Permit Number - TR-UTL-1223-03036
Review Name: RIGHT-OF-WAY REVIEW v.2
Review Status: Requires Resubmit
Review Date Reviewer's Name Type of Review Description Status Comments
12/27/2023 ROW Engineering Review REQUIRES RESUBMIT TR-UTL-1223-03036 (3526 E FORT LOWELL RD TUCSON, AZ 85716)

Comments:
1. The requirement for ROW Utility Permit are listed in the Public Utility Administrative Manual Section 9 https://www.tucsonaz.gov/files/sharedassets/public/v/1/dtm/documents/linked-documents/city-of-tucson-public-utility-administrative-manual_20230504.pdf
2. Because this work involves trenching on an arterial street, both a site plan and a construction plan are required:
Site Plan:
1. Provide a cover sheet which shows:
a. A completed title block including the utility owner, project name, project contact information, and utility project work number/order.
b. A “Location Map” labeling Major Streets and Routes, project site limits, North arrow, Township Range and Section information, Tucson, Pima County and Arizona. Scale is typically 1” = 3 miles.
2. Provide a Sheet Index, stating plan sheet numbers and corresponding sheet names.
3. Provide a Sheet Index Map indicating plan sheet numbers and limits. Show North Arrow, ROW lines, and label street names. Show boundary for other jurisdictions (Pima County, ADOT, UPRR, etc.) if applicable. Note: Sheet Index Map does not need to be to scale.
4. Include Arizona 811 Blue Stake note stating, “Notify Arizona 811 two working days before construction. Call 811 or 1-800-STAKE-IT (1-800-782-5348).” CITY OF TUCSON PUBLIC UTILITY ADMINISTRATIVE MANUAL 37
5. Provide a Legend accurately showing all line types, symbols and abbreviations used on construction plans.
6. Include City of Tucson General Construction Notes. (i.e. trench details, pavement patch repair, sidewalk repair, aerial notes
CONSTRUCTION PLAN REQUIREMENTS:
1. Include a North arrow on each plan sheet. Orient the layout so North is at either the top or the left of the page.
2. Provide a scale or dimension adequate to accurately identify physical features and their potential conflicts within the construction area. Scale should be no smaller than 1” = 100’ for aerial/above ground projects and 1” = 40’ for underground.
3. Label and dimension all existing or proposed Right-of-Way limits and adjacent easements. Label all street names and alleys. Stationing is required for work on MSR streets and must also include the survey control line.
4. Show matchlines.
5. Show all existing and proposed improvements including landscaping, surface features and underground structures.
6. Provide lineal feet summary of installations and abandonments within the ROW. 7. Provide work method for construction (i.e. excavation/trenching, bore, insertion/pull thru, aerial/overlashing)
8. For underground work, show the location and size of all existing and proposed facilities in relation to the Right-of-Way.
a. Provide a primary dimension from existing and proposed facilities to either the ROW limit or ROW centerline (not centerline of street).
b. Provide a secondary dimension to surface features (i.e., edge of pavement or behind of curb). Dimensions should be measured parallel to ROW limits or surface features.
9. When the road is uncurbed provide dimensions between survey monuments located at the nearest cross street.
10. Provide a dimension that accurately describes all proposed utility crossings (underground and overhead) when measured at a 90-degree angle, plus or minus 10 degrees or parallel with intersecting road.
11. When crossing other utilities larger than 12-inches in diameter, include a vertical profile with a scale of 1” =4’ showing 2’ minimum separation.
12. Proposed and existing storm drains, sanitary sewer lines, water lines, and vertical poles over 12-inches in diameter shall be drawn to scale.
13. All proposed conduit or conduit systems over 12-inches in diameter or width shall be drawn to scale if proposed construction is within 10-feet of existing conduit.
14. Show all Railroad and Modern Streetcar tracks.
15. Show approximate FEMA floodplain or City of Tucson local flood limits and label all rivers, washes, and watercourses.
16. Show all existing topography affected by the proposed construction if it may affect the vertical elevation or depth of a utility installation.
Traffic Control Plan
1. COT DTM Policy 6.01.1 - Instead of closing the bike lanes on Fort Lowell, please provide a space for bikes behind the barricades. Use a second line of barricades to create a 5’ shifting bike lane. Email me with questions or for an example.
2. Show all bus stops on Fort Lowell. If planning to temporarily move the bus stop, coordinate with SunTran’s Tony Tuccino, antonio.tucciono@tucsonaz.gov. Include a note that you have coordinated SunTran in your next submittal.
Faffs Riederer
Faffs.Riederer@tucsonaz.gov
Abbreviations: City of Tucson Code (COTC), Unified Development Code (UDC) Administrative Manual (AM), Technical Standards Manual (TSM), Street Design Guide (SDG), Pima Association of Governments Standard Details (P. A. G. SD), Access Management Guidelines (AMG), Major Streets and Routes Plan (MS&R), City of Tucson Public Utility Administrative Manual (PUAM), City of Tucson Department of Transportation and Mobility (COT DTM).
12/27/2023 Transportation Application Review REVIEW COMPLETED Requested Construction plan has been attached, TEP plan.