Permit Review Detail
Review Status: Requires Resubmit
Review Details: RESIDENTIAL NEW DWELLING v.2
Permit Number - TC-RES-1023-09092
Review Name: RESIDENTIAL NEW DWELLING v.2
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 02/24/2025 | Site Engineering - Standard | NOT REQUIRED | |||
| 02/24/2025 | Bldg Permits - Post Review Express | PENDING ASSIGNMENT | |||
| 01/28/2025 | Residential Building - Standard | REQUIRES RESUBMIT | A solid surface walls greater than 7 feet above grade such as metal sheets require construction plans designed and stamped by an Arizona structural engineer for supporting wind loads, R106.1.1. | ||
| 02/21/2025 | Site Zoning - Standard | REQUIRES RESUBMIT | PDSD TRANSMITTAL FROM: Bobby Parsons Zoning Section Review PROJECT: TC-RES-1023-09092 4618 E 12th Street Tucson, AZ 85711 Add metal fence to east side of front yard. 52 feet long and 6 feet high. Solely on/within my boundary lines. (1st Revision Review) TRANSMITTAL DATE: 2/21/2025 This site is located in the R-1 zone (UDC 4.7.8). A single-family residence is a permitted use in this zone (Table 4.8-2) subject to Use Specific Standards 4.9.7.B.5 - .9. Comments: Please resubmit revised drawings along with a detailed response letter which states how all Zoning Review Section comments were addressed. 1. Comment: Per UDC 6.6.2.I, the maximum height of a wall or fence within a perimeter yard shall be 6’, however, the wall or fence may be higher than 6’ but no higher than 10’ if: • At least 75% of the area above 6’ in height is left unobstructed and open through the use of architectural elements such as arches, columns, wrought iron; • Part of, or located on top of, a retaining wall no higher than 10’ measured from design grade and no higher than 6’ measured from the top of the retaining portion of the wall; • A greater height is required through the rezoning process or the special exception land use process; or • A greater height is required by a specific UDC standard. The proposed metal fence is 8’ which exceeds the maximum allowed height of a wall and does not meet the criteria above. Either keep the height of the approved fence at 6’ or apply for a Design Development Option (DDO) to increase the allowed height of the proposed metal fence to 8’. Please reach out to Georgia Pennington at Georgia.Pennington@tucsonaz.gov or Mark Castro at Mark.Castro@tucsonaz.gov if you have questions about the DDO process. Here is a link with information about the DDO process: https://www.tucsonaz.gov/Departments/Planning-Development-Services/Planning-Zoning-Applications/Zoning-Administration#section-3. 2. Comment: Additional comments may be forthcoming depending on responses to zoning review comments and plans submitted. If you have any questions about this transmittal, please contact Bobby Parsons at Robert.Parsons@tucsonaz.gov. |
||
| 01/25/2025 | PDSD Application Completeness Express | REVIEW COMPLETED |