Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit Number: TC-RES-0725-03636
Parcel: 138110030

Address:
360 E BILBY RD

Review Status: Requires Resubmit

Review Details: RESIDENTIAL ADD/ALT v.1

Permit Number - TC-RES-0725-03636
Review Name: RESIDENTIAL ADD/ALT v.1
Review Status: Requires Resubmit
Review Date Reviewer's Name Type of Review Description Status Comments
08/19/2025 Bldg Permits - Post Review Express PENDING ASSIGNMENT
08/19/2025 Residential Building - Standard REQUIRES RESUBMIT TC-RES-0725-03636
360 E BILBY RD TUCSON
Submit your revised drawings along with a detailed response letter, which states how all Building Review Section comments were addressed.
COMMENTS:
1. Please show existing receptacles and smoke/Co2 detectors on pg.A2.1
2. Are you using epoxy at the Dowel Bars on pg. A3 connecting to existing slab? If so please clarify.
3. Show where weep screed is being installed on pg. A3
4. Provide roof plan, how are new walls connecting to roof and new roof? Provide section of how roof is extending. Rafters or trusses?
5. What material is being used for interior finish on pg. A3?
6. Per the inclusive home design referenced on pg. A0.0 in Governing codes, provide a detail of how the front door will be ADA accessible, it looks like there will be a drop off from the FFE to the existing concrete.
7. Are you adding any diffusers to make sure the current CFM will adequately heat and cool the added living space? If so please provide the details.

Should you have any questions about these comments, I can be reached at Zane.Aouane@tucsonaz.gov
08/01/2025 Site Zoning - Standard REQUIRES RESUBMIT PDSD TRANSMITTAL

FROM: Olga Salazar
Planner

PROJECT: TC-RES-0725-03636
360 E BILBY RD TUCSON, AZ 85706
Porch Enclosure (1st Review)

TRANSMITTAL DATE:

This site is located in the C-2 zone (Unified Development Code (UDC) Article 4.7.21). A single-family residence is a permitted use in this zone (Table 4.8-4) subject to Use Specific Standards 4.9.7.B.6.

1. COMMENT: Residential projects in a C-2 Zone have a lot coverage of 70%. Please provide a lot coverage calculation on your next submittal.

2. COMMENT: The require setback for residential projects adjacent to nonresidential zones is 10 feet. The proposed setback is 7’6’’. A Design Development Option (DDO) is required. Please contact Mark Castro for next steps Mark.castro@tucsonaz.gov. The DDO application is available at the following link: https://www.tucsonaz.gov/files/sharedassets/public/v/1/pdsd/documents/planning-amp-zoning/ddo_for_setback_and_height_udc.pdf.

3. COMMENT: There appears to be discrepancy with the dimensions of the lot provided and the city’s GIS information. There appears to be a small parcel (138-11-002A) that is a part of this site but owned by a different entity. Should the two parcels be combined the DDO referenced in comment #2 might not be necessary. However, lot dimensions must still be verified and corrected.

4. COMMENT: Based on aerial imagery, there are two unpermitted structures on the site. These structures must appear on your site plan fully dimensioned and must meet setbacks. Accessory structures on the front yard are not permitted. If setbacks cannot be met, a neighbor waiver may be utilized to reduced the setbacks of accessory structures.

Example of an adjacent owner’s setback waiver for detached accessory
structures:

The adjacent owner’s waiver statement must be added to the site plan. The following statement can be used.
My Name is __________________ and I am the owner of the property located at ________________________.
I have reviewed the site plan and I have no objection to structure being located or constructed ______ feet from
the property line as depicted on the site plan.
Signature: _____________________________
Date: _________________________________
************************************************************************************************************
Ejemplo de renuncia de retroceso de un propietario adyacente para chalets
estructuras accesorias.
Declaración de exención del propietario adyacente debe agregarse al plan de sitio. Puede utilizar la siguiente
instrucción.
Mi nombre es ________________ y yo soy el dueño de la propiedad ubicada en la _____________________.
He revisado el plan y no tengo ninguna objeción a que estructura se encuentra o construye ____________ desde
la línea de propiedad, como se muestra en el plan.
Firma: ________________________________
Fecha: ________________________________

If you have any questions about this transmittal, please contact Olga Salazar at Olga.Salazar@tucsonaz.gov.
07/22/2025 PDSD Application Completeness Express REVIEW COMPLETED