Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Requires Resubmit
Review Details: RESIDENTIAL NEW DWELLING v.1
Permit Number - TC-RES-0724-04382
Review Name: RESIDENTIAL NEW DWELLING v.1
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 07/31/2024 | Residential Building | NOT REQUIRED | |||
| 08/27/2024 | Site Engineering | NOT REQUIRED | |||
| 08/27/2024 | Bldg Permits - Post Review | PENDING ASSIGNMENT | |||
| 08/26/2024 | Site Zoning | REQUIRES RESUBMIT | FROM: PDSD Zoning Review Section PROJECT: TC-RES-0724-04382 924 E 9TH ST. – R-3 Storage Container (1st Review) TRANSMITTAL DATE: August 26, 2024 COMMENTS: Please resubmit revised drawings along with a detailed response letter, which states how all Zoning Review Section comments were addressed. This site is located in the R-3 zone (UDC 4.7.12). A single-family residence is a permitted use in the zone (UDC Table 4.8-2), subject to Use Specific Standard 4.9.7.B.6. 1. Provide a residential plot plan that meets the requirements found at: https://www.tucsonaz.gov/Departments/Planning-Development-Services/Building-Safety/Plan-Examples/Plot-Plan-Example, to include but not limited to: a. The plot plan shall be drawn at an engineering scale, i.e. 1” = 10’, 1” =20’. b. Provide the owners name on the plot plan. c. Provide a lot coverage calculation on the plot plan. d. Show all utility lines on the plan. e. Clearly show all property lines along with distances on the plot plan. f. Indicate the zoning of this parcel along with all adjacent properties on the plot plan. g. Provide the legal description, RIECKERS LOT 4 BLK 6, on the plot plan. h. Provide the height of the container on the plot plan. 2. The storage container does not meet the minimum perimeter yard setback of six (6) feet, or two-thirds (2/3) the height of the structure’s wall facing each interior property line , greater of the two, (Table 6.3-2.A). Based on a standard 8’-0” tall container the required perimeter yard setback 6’-0”, proposed setback is 1’-0”. Per UDC Article 6.6.2.D An accessory structure that exceeds the allowable height of a wall within a perimeter yard and is detached from a principal structure shall comply with the perimeter yard width standards of the principal structure, except that the accessory structure may be built to a parcel line with the consent of the adjoining or, when separated by an alley, adjacent property owner(s). To secure this neighbor setback waiver the following statement must be provided on the plot plan and be signed and dated by the adjacent property owner(s): My Name is____________________ and I am the owner of the property located at_______________________. I have reviewed the site plan and I have no objection to structure being located or constructed________ feet from the property line as depicted on the site plan. Signature: _____________________________ Date: _________________________________ If you are unable to secure the waiver a Design Development Option (DDO) will need to be submitted and approved to reduce the setback. DDO application and requirements can be found at: https://www.tucsonaz.gov/Departments/Planning-Development-Services/Planning-Zoning-Applications/Zoning-Administration. If you have questions about the DDO application or process please contact Wyatt Berger at Wyatt.Berger@tucsonaz.gov or Georgia Pennington at Georgia.Pennington@tucsonaz.gov. The Unified Development Code (UDC) can be found at: https://www.tucsonaz.gov/Departments/Planning-Development-Services/Codes/Zoning-Code. If you have any questions about this transmittal, please contact Zone1.desk@tucsonaz.gov. |
||
| 07/29/2024 | PDSD Application Completeness | REVIEW COMPLETED |