Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Requires Resubmit
Review Details: RESIDENTIAL FENCE/WALL v.1
Permit Number - TC-RES-0525-02594
Review Name: RESIDENTIAL FENCE/WALL v.1
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 05/27/2025 | Light Residential Building Review (OIP) | APPROVED | Anything over 7ft will require an engineers review and approval. Please ensure the fence is no higher than 7ft upon inspection. | ||
| 06/02/2025 | Site Engineering | NOT REQUIRED | |||
| 06/02/2025 | Bldg Permits - Post Review Express | PENDING ASSIGNMENT | |||
| 06/02/2025 | Site Zoning | REQUIRES RESUBMIT | PDSD TRANSMITTAL FROM: Bobby Parsons Zoning Section Review PROJECT: TC-RES-0525-02594 355 S Craycroft Rd. Tucson, AZ 85711 7’ corrugated fence (1st Review) TRANSMITTAL DATE: 6/2/2025 This site is located in the R-1 zone (UDC 4.7.8). A single-family residence is a permitted use in this zone (Table 4.8-2) subject to Use Specific Standards 4.9.7.B.5 - .9. Comments: Please resubmit revised drawings along with a detailed response letter which states how all Zoning Review Section comments were addressed. 1. Comment: There is a storage container on the South property line that appears in aerial imagery around 2023. Site zoning was unable to find a permit for this storage container. Either provide permit documentation for this container or apply for a separate residential addition/alteration permit to get the storage container permitted. Site zoning is unable to approve this permit until a permit for the storage container has been started and the Design Development Option (DDO) has been approved. Please see below for DDO comments. 2. Comment: Per UDC 6.6.2.I, the maximum height of a wall or fence within a perimeter yard shall be 6’, however, the wall or fence may be higher than 6’ but no higher than 10’ if: • At least 75% of the area above 6’ in height is left unobstructed and open through the use of architectural elements such as arches, columns, wrought iron; • Part of, or located on top of, a retaining wall no higher than 10’ measured from design grade and no higher than 6’ measured from the top of the retaining portion of the wall; • A greater height is required through the rezoning process or the special exception land use process; or • A greater height is required by a specific UDC standard. The proposed privacy fence is 7’ which exceeds the maximum allowed height of a wall and does not meet the criteria above. Either reduce the height of the fence to 6’ or apply for a Design Development Option (DDO) to increase the allowed height of the proposed fence to 7’. Please apply for your DDO as a sub record in the permit workflow. Please reach out to Georgia Pennington at Georgia.Pennington@tucsonaz.gov or Mark Castro at Mark.Castro@tucsonaz.gov if you have questions about the DDO process. Here is a link with information about the DDO process: https://www.tucsonaz.gov/Departments/Planning-Development-Services/Planning-Zoning-Applications/Zoning-Administration#section-3. 3. Comment: Additional comments may be forthcoming depending on responses to zoning review comments and plans submitted. If you have any questions about this transmittal, please contact Bobby Parsons at Robert.Parsons@tucsonaz.gov. |
||
| 05/15/2025 | PDSD Application Completeness Express | REVIEW COMPLETED |