Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit Number: TC-RES-0423-04669
Parcel: 114460480

Address:
7136 E ONDA CI

Review Status: Requires Resubmit

Review Details: RESIDENTIAL NEW DWELLING v.2

Permit Number - TC-RES-0423-04669
Review Name: RESIDENTIAL NEW DWELLING v.2
Review Status: Requires Resubmit
Review Date Reviewer's Name Type of Review Description Status Comments
05/12/2023 Site Zoning APPROVED
05/09/2023 Site Engineering NOT REQUIRED
05/24/2023 Bldg Permits - Post Review Express PENDING ASSIGNMENT
05/24/2023 Residential Building REQUIRES RESUBMIT Permit Review TC-RES-0423-04669 (7136 E ONDA CI TUCSON, AZ 85715)
Plan review for the above referenced structure has been completed. This letter reflects comments to be addressed. Provide updated Plans/calculations and a written response Letter to each of the notated items indicating action taken.
Code reference, 2018 International Residential Code (IRC).

1. Changes in the gas appliances requires a gas plan. Provide the following information for code verification.
a. Longest length, measured from the meter to the farthest attached appliance, G2413.4.1. This length is used in the following tables to select the correct pipe sizes. (Use the next largest length row that is greater than the longest length measurement. )
b. The individual demand of each attached appliance and total demand. Use Table G2413.4(1) (Metallic Pipe) to calculate correct required pipe sizes. (Table G2413.4(7) Polyethylene Plastic Pipe). (100,000 BTUh = 100 Cubic Feet of Gas per Hour).
https://www.tucsonaz.gov/files/pdsd/permits/GAS_HANDOUT_2018_IRC_2019.2.4.pdf
https://www.tucsonaz.gov/files/pdsd/permits/Gas_Piping_Template.pdf
https://www.tucsonaz.gov/files/pdsd/permits/Sample_Gas_Template_0.pdf
2. The provided plans show the removal of the gas line to the exiting furnace. Provide heating facilities in all habitable rooms, R303.9.
3. The replacement of the existing furnace will need to be included in the scope of work or an additional permit will need to be filed to cover this.
4. Provide demand calculations in accordance with Manual J/S/D standards, M1401.3, M1601.1. Systems shall be sized in accordance with Manual S based on building loads calculated in accordance with Manual J and duct systems sized in accordance with Manual D.

Contact Jeremy Hamblin with any questions: Jeremy.hamblin@tucsonaz.gov
05/03/2023 PDSD Application Completeness Express REVIEW COMPLETED