Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

PRO is currently experiencing an outage. Some documents and records may not be available on PRO momentarily. We apologize for the inconvenience and are working to restore full access.

Permit Number: TC-RES-0123-01873
Parcel: 126061570

Review Status: Requires Resubmit

Review Details: RESIDENTIAL NEW DWELLING v.1

Permit Number - TC-RES-0123-01873
Review Name: RESIDENTIAL NEW DWELLING v.1
Review Status: Requires Resubmit
Review Date Reviewer's Name Type of Review Description Status Comments
03/08/2023 Site Engineering NOT REQUIRED
03/09/2023 Bldg Permits - Post Review Express PENDING ASSIGNMENT
03/08/2023 Site Zoning REQUIRES RESUBMIT FROM: Paul Camarena
PDSD Zoning Review Section

PROJECT: TC-RES-0123-01873
4034 E ROBERTS PL Zoning R-1

TRANSMITTAL DATE:‎March 8, 2023

COMMENTS: Please resubmit revised drawings along with a detailed response letter, which states how all Zoning Review Section comments were addressed.

1.COMMENT: Provide a Residential Plot Plan that meets the requirements found at: https://www.tucsonaz.gov/files/pdsd/forms/Residential_Plot_Plan_Requirements.pdf. This shall in include:
A. Property line distances,
In the link provided below is a Plot plan grid that can be used. Provide below is the assessors record map that can be use to find the property line distances.
https://www.tucsonaz.gov/files/pdsd/forms/Residential_Plot_Plan_Grid.pdf
https://www.asr.pima.gov/ParcelData/Map/Arm/MP07/07081_02.PDF


2.COMMENT: Clearly show the location of the wall, Provide the height of the proposed wall. Per UDC 6.6.2.I. The maximum height of a wall or fence within a perimeter yard shall be six feet; however, the wall or fence may be higher than six feet, but no higher than ten feet, if: (See Figure 6.6.1-A, Height of Wall or Fence within a Side or Rear Perimeter Yard .)
1. At least 75% of the area above six feet in height is left unobstructed and open through the use of architectural elements, such as arches, columns, or wrought iron;
2. Part of, or located on top of, a retaining wall no higher than ten feet measured from design grade and no higher than six feet measured from the top of the retaining portion of the wall;
3. A greater height is required through the rezoning process or the special exception land use process; or,
4. A greater height is required by a specific UDC standard.





If you have any questions about this transmittal, Contact Paul Camarena at (520)837-4986 or by email Paul.Camarena@tucsonaz.gov
02/13/2023 PDSD Application Completeness Express REVIEW COMPLETED
03/09/2023 Residential Building REVIEW COMPLETED
03/03/2023 Site Landscape REVIEW COMPLETED