Permit Review Detail
Review Status: Requires Resubmit
Review Details: BUILDING DEFERRED SUBMITTAL REVIEW v.1
Permit Number - TC-MDP-0723-01306
Review Name: BUILDING DEFERRED SUBMITTAL REVIEW v.1
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 02/12/2024 | Bldg Permits - Post Review Express | PENDING ASSIGNMENT | |||
| 02/12/2024 | Special Inspection Certificate Review (Deferred Submittal) Express | REQUIRES RESUBMIT | The epoxy condition was removed however the Outdoor lighting and the I-joist conditions remain as they were required on the model plan as deferred submittals or required shop drawings and do not appear to have been submitted. The deferred submittals as copied from the model plan are below. please provide these the resolve these conditions. PREFABRICATED I-JOISTS: SHOP DRAWINGS THAT CONTAIN CALCULATIONS SHALL BE SEALED/SIGNED BY AN ENGINEER REGISTERED IN ARIZONA. SHOP DRAWINGS SHALL BE SUBMITTED TO THE ENGINEER OF RECORD FOR APPROVAL. UPON APPROVAL, DOCUMENTS SHALL BE SUBMITTED TO THE BUILDING JURISDICTION FOR REVIEW. PLAN CHECK AND PERMIT FEES ARE THE SUBCONTRACTORS RESPONSIBILITY LIGHTING CODE COMPLIANCE: APPROVED LIGHTING CALCULATION IN ACCORDANCE WITH OLC 3.1.2 INCLUDING ALL EXTERIOR FIXTURES ON THE PROPERTY. IN THE CALCULATIONS, MODEL PLAN SHOULD SPECIFY A MIN. LOT SIZE FOR THE PROPOSED EXTERIOR LIGHTING. CUT SHEETS SHALL BE SUBMITTED FOR ALL FCO FIXTURES SHOWING THE ANGLE OF CUTOFF, LIGHT EMISSIONS AND FIXTURE WATTAGE. ALL OTHER FIXTURES ARE ASSUMED TO BE UNSHIELDED (NON-FCO STYLE) |
||
| 02/09/2024 | PDSD Application Completeness Express | REVIEW COMPLETED |