Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Requires Resubmit
Review Details: SITE FROM MODEL TEMPLATE - INFILL BUILDERS v.3
Permit Number - TC-MDP-0424-00405
Review Name: SITE FROM MODEL TEMPLATE - INFILL BUILDERS v.3
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 05/30/2024 | Bldg Permits - Post Review | PENDING ASSIGNMENT | |||
| 05/28/2024 | Residential Building | REQUIRES RESUBMIT | Permit Review TC-MDP-0424-00405 (120 E YAVAPAI RD TUCSON, AZ 85705) Plan review for the above referenced structure has been completed. This letter reflects comments to be addressed. Provide updated Plans/calculations and a written response Letter to each of the notated items indicating action taken. Resubmitted plans that do not contain a written response Letter addressing each of the notated items indicating action taken, may be delayed until response letter is received. Code reference, 2018 International Residential Code (IRC), 2017 National Electrical Code (NEC). 1. Resubmit when the final Plat is approved and recorded. TD-DIV-1223-00135 2. If the address changes for this lot, provide an updated site plan with the corrected address and parcel number. Contact Jeremy Hamblin with any questions: Jeremy.hamblin@tucsonaz.gov |
||
| 05/30/2024 | Site Zoning | REQUIRES RESUBMIT | FROM: PDSD Zoning Review Section PROJECT: TC-MDP-0424-00405 120 E YAVAPAI RD. – R-3 New SFR (2nd Review) TRANSMITTAL DATE: May 30, 2024 COMMENTS: resubmit revised drawings along with a detailed response letter, which states how all Zoning Review Section comments were addressed. This site is located in the R-3 zone (UDC 4.7.12). A single-family residence (SFR) is a permitted use in this zone (Table 4.8-2). See Use-Specific Standards 4.9.7.B.6. Perimeter yard setbacks are based on a wall height measurement from design grade to the highest point of the exterior wall, top of parapet. UDC Article 6.4.5.B & Figure 6.4.5-A. As height dimensions from design grade to the top of parapet were not provided on TC-MDP-0124-00040, Zoning has added 6’ to the 22’-8” height provided on the elevations. 1. This comment was not addressed. Based on the elevations approved under model plan permit TC-MDP-0124-00040 the height of the wall is 22’-8” as measured from finished floor. This comment stands until such time the required 15’-6” setback is provided or the model plan is revised. Based on a wall height of 23’-2” the required perimeter yard setbacks from the proposed SFR to the north, south and east property lines are 15’-6”, proposed perimeter yard setback is 15’-1”. A Design Development Option (DDO) must be submitted and approved to reduce the required setback. DDO application and requirements can be found at: https://www.tucsonaz.gov/Departments/Planning-Development-Services/Planning-Zoning-Applications/Zoning-Administration. If you have questions about the DDO application or process please contact Wyatt Berger at Wyatt.Berger@tucsonaz.gov or Georgia Pennington at Georgia.Pennington@tucsonaz.gov. 2. This comment was not addressed. Until final plat TD-DIV-1223-00135 is approved by all review agencies and recorded Zoning cannot approve this plan. If you have any questions about this transmittal, please contact Zone1.desk@tucsonaz.gov. |
||
| 05/17/2024 | PDSD Application Completeness | REVIEW COMPLETED | |||
| 05/28/2024 | ROW Engineering Review | REVIEW COMPLETED | Previous comments have been addressed apply for ROW permit under sub records prior to working in the ROW. |