Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit Number: TC-FBB-0625-00089
Parcel: 11617077A

Address:
1106 W HURON ST

Review Status: Requires Resubmit

Review Details: MANUFACTURED/MOBILE/PARK MODEL HOME v.1

Permit Number - TC-FBB-0625-00089
Review Name: MANUFACTURED/MOBILE/PARK MODEL HOME v.1
Review Status: Requires Resubmit
Review Date Reviewer's Name Type of Review Description Status Comments
07/01/2025 Residential Building APPROVED
07/14/2025 Site Engineering NOT REQUIRED
07/14/2025 Bldg Permits - Post Review Express PENDING ASSIGNMENT
07/11/2025 Site Zoning REQUIRES RESUBMIT FROM: PDSD Zoning Review Section

PROJECT: TC-FBB-0625-00089
1106 W HURON ST. – R-2
Manufactured Home – 2nd Dwelling Unit(1st Review)

TRANSMITTAL DATE: July 11, 2025

COMMENTS: Provide a detailed response letter with your submittal that clearly shows how you have addressed all Zoning comments.

This site is located in the R-2 zone (UDC 4.7.9). A Manufactured Housing is a permitted use in this zone (Table 4.8-2). See Use-Specific Standards 4.9.7.B.6, .9, & .10.

1. Provide a residential plot plan that meets the requirements found at: https://www.tucsonaz.gov/Departments/Planning-Development-Services/Permits/Plan-Examples/Plot-Plan-Example, to include but not limited to:
a. The plot plan shall be drawn at an engineering scale, i.e. 1” = 10’, 1” = 20’.
b. Provide the owner’s name on the plot plan.
c. Provide a dimension from the centerline of Huron Street to the face of curb, and from face of curb to the south property line. Per Construction Plan I-76-002, sheet 7, found at: https://maps-and-records.tucsonaz.gov/construction-plans/details/I-76-002, the distance from centerline to face of curb is 15’ and from face of curb to the south property line is 10’.

2. Provide the following notes on the plot plan:
Manufactured Housing requirements
1. Per UDC Section 4.9.7.B.6 a manufactured housing unit is not considered a dwelling for the purposes of this section, unless the following standards are met or a subdivision plat that has been clearly identified for manufactured housing has been approved and permits for manufactured homes have been issued for 25% or more of the lots prior to December 27, 2000:
2. Per UDC Section 4.9.7.B.6.a It is placed on an excavated and backfilled foundation (ground set). If the home is located in a floodplain, the bottom of the lowest floor joist shall be a minimum of one foot above the 100-year/base flood elevation, and the foundation of the home shall be placed on the fill;
3. Per UDC Section 4.9.7.B.6.b No more than eight inches of perimeter skirting wall shall be visible from the street frontage of the property. The perimeter skirting wall shall match the exterior color of the home;
4. Per UDC Section 4.9.7.B.6.c The exterior siding materials shall be either hardboard, vinyl, or stucco;
5. Per UDC Section 4.9.7.B.6.d Concrete or masonry steps shall be provided for the entry on the street side of the dwelling;
6. Per UDC Section 4.9.7.B.6.e All entry doors on the street side of the dwelling shall be inward-swinging doors;
7. Per UDC Section 4.9.7.B.6.f The roofing style and materials shall be either flat roof (Pueblo), steel rib roof, or shingle or tile roof with a 3:12 roof pitch or greater. All pitched roofs, except those that are disguised by a parapet, shall have a minimum six inch eave on all sides of the dwelling.

The Unified Development Code (UDC) can be found at: https://www.tucsonaz.gov/Departments/Planning-Development-Services/Codes/Zoning-Code.

If you have any questions about this transmittal, please contact Zone1.desk@tucsonaz.gov.
06/27/2025 PDSD Application Completeness Express REVIEW COMPLETED