Permit Review Detail
Review Status: Requires Resubmit
Review Details: MANUFACTURED/MOBILE/PARK MODEL HOME v.1
Permit Number - TC-FBB-0125-00013
Review Name: MANUFACTURED/MOBILE/PARK MODEL HOME v.1
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 03/06/2025 | Bldg Permits - Post Review Express | PENDING ASSIGNMENT | |||
| 02/13/2025 | Residential Building | REQUIRES RESUBMIT | 2. Provide the set-up permit number provided by https://housing.az.gov | ||
| 03/06/2025 | Site Engineering | REQUIRES RESUBMIT | TC-FBB-0125-00013 5732 E FARMSTEAD DR Site engineering comments are as follows: 1. Per the Wilmot Farms Subdivision Plat, this manufactured home replacement requires a flood plain use permit. Please start a new FUP with Elevation Certificate at our permit application web page: https://tdc-online.tucsonaz.gov/#/home Ryan Insalaco – ryan.insalaco@tucsonaz.gov |
||
| 02/26/2025 | Site Zoning | REQUIRES RESUBMIT | FROM: PDSD Zoning Review PROJECT: TC-FBB-0125-00013 5732 E FARMSTEAD DR. – SH MANUFACTURED HOME (1st Review) TRANSMITTAL DATE: February 26, 2025 Resubmit revised drawings and any redlined plans along with a detailed response letter, which states how all Zoning Review Section comments were addressed. This site is located in the SH zone (UDC 4.7.5). A single-family residence (SFR) is a permitted use in this zone (Table 4.8-1). 1. Per the Wilmot Farms final plat found at: https://maps-and-records.tucsonaz.gov/subdivisions/details/5660, General Note 13 the maximum allowable lot impervious surface coverage is 7% of the lot area. Provide a lot impervious surface coverage calculation on the plan. 2. The sheds shown on the plan show up sometime after 2016 on aerial photos. Zoning was not able to find approved permit/compliance documents for these sheds. Provide the square footage and height for all sheds shown on the plan. 3. The three (3) sheds show along the southeast corner of the parcel show up sometime after 2016 on aerial photos. Zoning was not able to find approved permit/compliance documents for these sheds. Provide the square footage and height of these sheds on the plan. As these structures do not meet the required 20’-0” perimeter yard setback, UDC Table 6.3-1.A, at a minimum a neighbors setback waiver will need to be secured, UDC Article 6.6.2.D. If you are not able to secure the waiver a Design Development Option (DDO) will need to be submitted and approved for the reduced perimeter yard setbacks. To secure this neighbor setback waiver the following statement must be provided on the plot plan and be signed and dated by the adjacent property owner(s): My Name is____________________ and I am the owner of the property located at_______________________. I have reviewed the site plan and I have no objection to structure being located or constructed________ feet from the property line as depicted on the site plan. Signature: _____________________________ Date: _________________________________ DDO application and requirements can be found at: https://www.tucsonaz.gov/Departments/Planning-Development-Services/Planning-Zoning-Applications/Zoning-Administration. If you have questions about the DDO application or process please contact Georgia Pennington at Georgia.Pennington@tucsonaz.gov”. The Unified Development Code (UDC) can be found at: https://maps-and-records.tucsonaz.gov/subdivisions/details/5660 https://www.tucsonaz.gov/Departments/Planning-Development-Services/Codes/Zoning-Code. If you have any questions about this transmittal, please contact Zone1.desk@tucsonaz.gov |
||
| 02/12/2025 | PDSD Application Completeness Express | REVIEW COMPLETED |