Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Approved
Review Details: COMMERCIAL REVIEW - FULL v.1
Permit Number - TC-COM-1025-01844
Review Name: COMMERCIAL REVIEW - FULL v.1
Review Status: Approved
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 10/31/2025 | Commercial Building Standard | APPROVED | APPROVED UNDER MASTER SET LOCATED AT: TC-COM-0725-01397 | ||
| 10/14/2025 | Commercial Electrical Standard | APPROVED | |||
| 10/30/2025 | Commercial Mechanical Standard | APPROVED | 1. Provide heating/cooling load calculations to justify the capacity of the unit being installed and provide controls that comply with Sections R403.1 and R503.1.2, IECC 2018. [Second comment: Comment not addressed.] [Initial comment: Replacement of AC units will require heating/cooling load calculations to justify the capacities of the units being installed (Sections R403.7, IECC 2018). The units themselves will also have to comply with Sections R403.1 and R503.1.2, IECC 2018 for controls. The replacement units shall have an efficiency rating that is greater than or equal to the minimum required by the Department of Energy requirements that went into effect on January 1, 2023, for the Southwest part of the country.] 2. State the size and termination point of the dryer exhaust. Reference: Section 504, IMC 2018. 3. Provide the type of combustion/relief openings (i.e. one opening or two openings) and the opening dimensions. Reference: Section 304.1, IFGC 2018. |
||
| 10/30/2025 | Commercial Plumbing Standard | APPROVED | |||
| 10/14/2025 | Water - PDSD Standard | NOT REQUIRED | NOT REQUIRED ON MASTER PERMIT TC-COM-0725-01397 | ||
| 10/09/2025 | Fire New Construction Standard | PENDING ASSIGNMENT | REVIEW COMPLETE ON MASTER PERMIT TC-COM-0725-01397 | ||
| 10/09/2025 | Outdoor Lighting Standard | PENDING ASSIGNMENT | APPROVED ON MASTER PERMIT TC-COM-0725-01397 | ||
| 10/09/2025 | Site Engineering Standard | PENDING ASSIGNMENT | NOT REQUIRED ON MASTER PERMIT TC-COM-0725-01397 | ||
| 10/09/2025 | Site Zoning Standard | PENDING ASSIGNMENT | APPROVED ON MASTER PERMIT TC-COM-0725-01397 | ||
| 11/05/2025 | Bldg Permits - Post Review Express | REVIEW COMPLETED | |||
| 10/09/2025 | PDSD Application Completeness Express | REVIEW COMPLETED |