Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Requires Resubmit
Review Details: COMMERCIAL REVIEW - LIMITED v.1
Permit Number - TC-COM-0924-01858
Review Name: COMMERCIAL REVIEW - LIMITED v.1
Review Status: Requires Resubmit
Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
---|---|---|---|---|---|
10/09/2024 | Commercial Plumbing | APPROVED | |||
10/14/2024 | Site Engineering | APPROVED | |||
10/03/2024 | Site Zoning | APPROVED | |||
10/09/2024 | Water - PDSD | APPROVED | |||
10/14/2024 | Bldg Permits - Post Review | PENDING ASSIGNMENT | |||
10/09/2024 | Commercial Building | REQUIRES RESUBMIT | ACTIVITY NO. TC-COM-0924-01858 ADDRESS/PARCEL: (160 S AVENIDA DEL CONVENTO Unit:UNIT 176 TUCSON, AZ 85745) Submit your revised drawings along with a detailed response letter, which states how all Building Review Section comments were addressed. The submitted documents were incomplete and a thorough plan review could not be performed. Please be aware, new comments may arise with the next review. Review will not proceed without the response letter. COMMENTS: 1. Please locate and label ALL the Restrooms, the Mop Sink and Drinking Fountain in the Site Plan. 2. Please resubmit. |
||
10/08/2024 | Commercial Electrical | REQUIRES RESUBMIT | Please provide compliance with the 2018 IECC for the lighting. Ref; 2018 IBC section 107.2.1, 2017 NEC, 2018 IECC |
||
10/09/2024 | Commercial Mechanical | REQUIRES RESUBMIT | 1. The minimum openable area for natural ventilation is based on the total floor area being ventilated. With no separation between the three areas and all of the ventilation air being supplied via the entry door, the required exhaust must also be based on the total area. Provide additional exhaust for the suite. Reference: Sections 402.6 and 403.2.1.(3), IMC 2018. 2. Nail salons require a source-capture exhaust system for each manicure station. The exhaust inlets shall be located a maximum of 12” horizontally and 12” vertically from the point of chemical application. Provide a detail showing how this is to be accomplished. Reference: Table 403.3.1.1, footnote h and Section 502.20, IMC 2018. |
||
09/30/2024 | Fire New Construction | REVIEW COMPLETED | |||
09/27/2024 | PDSD Application Completeness | REVIEW COMPLETED |