Permit Review Detail
Review Status: Requires Resubmit
Review Details: COMMERCIAL REVIEW - LIMITED v.1
Permit Number - TC-COM-0626-00852
Review Name: COMMERCIAL REVIEW - LIMITED v.1
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 06/25/2026 | Commercial Building | APPROVED | |||
| 06/29/2026 | Commercial Mechanical | APPROVED | |||
| 06/29/2026 | Commercial Plumbing | APPROVED | |||
| 06/25/2026 | Site Zoning | APPROVED | |||
| 06/29/2026 | Water - PDSD | APPROVED | |||
| 06/12/2026 | Site Engineering | NOT REQUIRED | |||
| 06/29/2026 | Bldg Permits - Post Review Express | PENDING ASSIGNMENT | |||
| 06/18/2026 | Commercial Electrical | REQUIRES RESUBMIT | Commercial Electrical Review TC-COM-0626-00852 (3587 E BROADWAY BL Unit:UNIT 125 TUCSON, AZ 85716) Plan review for the above referenced structure has been completed. This letter reflects comments to be addressed. Provide updated Plans/calculations and a written response Letter to each of the notated items indicating action taken. Resubmitted plans that do not contain a written response Letter addressing each of the notated items indicating action taken, may be delayed until response letter is received. Code reference, 2024 International Building Code (IBC), 2023 National Electrical Code (NEC), 2012 Outdoor Lighting Code (OLC). https://www.tucsonaz.gov/files/sharedassets/public/v/1/pdsd/documents/building-code/2012_outdoor_lighting_code_.pdf Contact Jeremy Hamblin with any questions: Jeremy.hamblin@tucsonaz.gov 1. Note or show that all GFCI receptacles or equipment shall be readily accessible per NEC 210.8. This may require showing GFCI breakers in the panel for certain kitchen equipment and receptacles. 2. A signature and date are required as part of the Registrant Seal (architect). Section R4-30-304 of the Rules of the Arizona State Board of Technical Registration states that in addition to signing the seal, the registrant shall include the date the document was signed. The EOR seal is missing the date signed and signature. 3. Right side of Sheet E-000 is cut off. Missing information and engineer's seal. 4. If the registrant is not a registered electrical engineer, the registrant must be qualified to perform such work per A.A.C. R4-30-302 and the electrical work must be incidental to the work of the registrant’s profession for the project per A.R.S. 32-143. (Incidental is defined as minor electrical work that is a result of the work of the registrant’s profession for the project). a. The provided scope of work does not meet the definition of ‘incidental’. The electrical sheets must be sealed by an Arizona Registered Electrical Engineer. |
||
| 06/23/2026 | Fire New Construction | REVIEW COMPLETED | |||
| 06/12/2026 | PDSD Application Completeness Express | REVIEW COMPLETED |