Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.

Permit Number: TC-COM-0423-01056
Parcel: 14118002C

Address:
9700 E ESMOND LP

Review Status: Requires Resubmit

Review Details: COMMERCIAL REVIEW - FULL v.1

Permit Number - TC-COM-0423-01056
Review Name: COMMERCIAL REVIEW - FULL v.1
Review Status: Requires Resubmit
Review Date Reviewer's Name Type of Review Description Status Comments
05/04/2023 Commercial Electrical APPROVED
05/08/2023 Bldg Permits - Post Review PENDING ASSIGNMENT
05/08/2023 Commercial Mechanical REQUIRES RESUBMIT 1. The specified hood, CaptiveAire model 4812SND-2, is a Type I grease hood and the shop drawings show an installation that is consistent with the required installation of a Type I hood. A Type 2 is not appropriate for the intended application. Correct the drawing locations that refer to a Type 2 hood. Reference: Section 107.2.1, IBC 2018.
2. Provide the manufacturer’s equipment data and installation instructions for the new gas-fired range. Ensure that the manufacturer’s required clearances to combustibles are met (e.g. at the rear of the range, from 30” AFF to the lower level of the hood). Reference: Sections 301 and 304.1, IMC 2018.
3. Verify that the evaporative cooling section of the makeup air unit is equipped with a recirculating water system. Reference: Section 928.2, IMC 2018 and ARS Title 45, Chapter 1, Article 12. See text at: (http://www.azleg.gov/viewdocument/?docName=http://www.azleg.gov/ars/45/00313.htm).
4. Clarify the requirements for the natural gas supply to the specified range. The Wolf model C36C-6BN range is advertised as having a natural gas input of 215,000 BTUH, not the 149,000 BTUH shown on sheet A3. Reference: Section 402.1, IFGC 2018.
5. Verify the required natural gas supply pressure (5” WG) and the minimum line pressure (7” WG) are available to the range. Reference: Section 303.1, IFGC 2018.
04/20/2023 Fire New Construction REVIEW COMPLETED
04/20/2023 PDSD Application Completeness REVIEW COMPLETED