Permit Review Detail
Review Status: Requires Resubmit
Review Details: COMMERCIAL REVIEW - FULL v.1
Permit Number - TC-COM-0326-00311
Review Name: COMMERCIAL REVIEW - FULL v.1
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 03/09/2026 | Site Engineering Standard | NOT REQUIRED | |||
| 03/19/2026 | Bldg Permits - Post Review Express | PENDING ASSIGNMENT | |||
| 03/19/2026 | Commercial Electrical Standard | REQUIRES RESUBMIT | Commercial Electrical Review TC-COM-0326-00311 (1101 S SANTA RITA AV TUCSON, AZ 85719) Plan review for the above referenced structure has been completed. This letter reflects comments to be addressed. Provide updated Plans/calculations and a written response Letter to each of the notated items indicating action taken. Resubmitted plans that do not contain a written response Letter addressing each of the notated items indicating action taken, may be delayed until response letter is received. Code reference, 2024 International Building Code (IBC), 2023 National Electrical Code (NEC). Contact Jeremy Hamblin with any questions: Jeremy.hamblin@tucsonaz.gov 1. This is a commercial project, requiring all documents to be prepared, sealed, signed, and dated by a registered design professional. Provide complete electrical plans, design, and calculations, sealed by an Arizona Registrant. Reference: Arizona Revised Statutes 32-125, Board of Technical Registration Rules R4-30-304, 2018 IBC section 107.1, 2017 NEC, City of Tucson Commercial Plan Submittal Requirements. https://www.tucsonaz.gov/files/sharedassets/public/v/1/pdsd/documents/checklists/commercial_submittal_requirements_july2023.pdf 2. Plans and specifications for installation of the following electrical systems shall be prepared and sealed by an electrical engineer registered in the State of Arizona. a. Installations, additions, or a modification where the electrical work exceeds 400 amperes, or the available fault current exceeds 22,000 amps. 3. Sheet e1.0, electrical site plan, shows a (N) 200A/3P Fused Disconnect, but the provided Existing One-line Diagram on sheet e2.0 does not show this new disconnect. Please clarify and provide consistent information. |
||
| 03/05/2026 | PDSD Application Completeness Express | REVIEW COMPLETED |