Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit Number: TC-COM-0325-00637
Parcel: 12809016H

Address:
1125 S SWAN RD

Review Status: Requires Resubmit

Review Details: COMMERCIAL REVIEW - LIMITED v.1

Permit Number - TC-COM-0325-00637
Review Name: COMMERCIAL REVIEW - LIMITED v.1
Review Status: Requires Resubmit
Review Date Reviewer's Name Type of Review Description Status Comments
04/18/2025 Commercial Building APPROVED
04/03/2025 Commercial Electrical NOT REQUIRED No modifications to the existing electrical.
04/03/2025 Outdoor Lighting NOT REQUIRED No modifications to the existing outdoor lighting.
04/22/2025 Bldg Permits - Post Review Express PENDING ASSIGNMENT
04/03/2025 Site Engineering PENDING ASSIGNMENT
04/21/2025 Signs REQUIRES RESUBMIT April 19. 2025
1125 S. Swan Rd - Activity # TC-COM-0325-00637 - Billboard COT 307
maintenance
Comments:
1. The Scope of Work to Replace Trim includes the complete removal of the
10 pieces (per face) of the Metal Face Panels. The Scope explains how the
panels must be removed in order to access and replace the plywood trim
and wood stringers and then the panels would be reinstalled. Trim and
Stringers are allowed to be replaced with like materials.
2. However, the text of the Scope of Work and a Detail in the lower right corner
of Sheet 2 titled "Face Panel Attachment (Top View)," shows an existing
connection of a Panel to a Stringer using "Obsolete panel section clips
0.188" thick to be removed and not reinstalled (35 pcs.)". A 16d nail is
shown in the Detail as somehow connecting the metal panel to the obsolete
clip, but how that actually works is not clear at all. What is the existing 16d
nail secured to?
3. Details A and B on Sheet 2 are not consistent in identifying exactly where
and how the metal panels are proposed to be attached to the new stringers
with spacers. Detail A is missing the metal panel altogether. The proposed
alternate attachment detail is not shown, but the Scope notes, "Reinstall
existing (10 pcs.) 29"x 10'-6"x .03" vertical metal face panels with 1" depth
of outside perimeter attaching with new (like) 16d nails." So, potentially, this
doesn't match the requirement in Exhibit 9 for "like" materials utilized in the
same manner as the existing. Please provide a clearer detail showing what
is existing at the top and bottom of the metal panels and how the new 16d
nails are proposed to secure the metal panels to the new stringers in a "like"
manner if the obsolete clip is removed and not replaced.
4. In the drawing on Sheet 2 titled "Poster Panel Top View," exactly what is
being attached to the tapered I-beams is not identified. I suspect it is a
stringer, not a metal panel. Please clarify.
5. Please revise and resubmit the requested details.
Kathi McLaughlin, BRC Reviewer
04/22/2025 Site Zoning REQUIRES RESUBMIT Until approved by Signs Zoning cannot approve this permit.
04/03/2025 Fire New Construction REVIEW COMPLETED
04/03/2025 PDSD Application Completeness Express REVIEW COMPLETED