Permit Review Detail
Review Status: Requires Resubmit
Review Details: COMMERCIAL REVIEW - FULL v.3
Permit Number - TC-COM-0226-00273
Review Name: COMMERCIAL REVIEW - FULL v.3
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 06/12/2026 | Bldg Permits - Post Review Express | PENDING ASSIGNMENT | |||
| 06/12/2026 | Commercial Plumbing Standard | REQUIRES RESUBMIT | ACTIVITY NO. TC-COM-0226-00273 ADDRESS/PARCEL: 3501 E BROADWAY BL TUCSON, AZ 85716 Submit your revised drawings along with a detailed response letter, which states how all comments were addressed. Review will not proceed without the response letter. The submitted documents were incomplete and a thorough plan review could not be performed. Please be aware, new comments may arise with the next review. If you have any questions about these review comments, I can be reached at Sean.Severson@tucsonaz.gov COMMENTS: 1. Previous comment not addressed. A reduced pressure principle assembly (RPA) is required for backflow protection at automotive service facilities. Please revise the plans to provide an RPA in accordance with Tucson Water Standard Detail SD-1802 and remove the proposed double check valve assembly. (Initial comment - A reduced pressure backflow preventer is required in place of the double check valve backflow preventer shown. Please also revise the plans to reference Detail SD-1802 instead of Detail SD-1805….) a. Per Section 27-75 (a) (15) of Article V, a reduced pressure principle assembly (RPA) is required for any premises on which chemicals, oils, solvents, pesticides, disinfectants, cleaning agents, acids or other pollutants and/or contaminants are handled in a manner by which they may come in direct contact with water, or there is evidence of the potential to contact water. |
||
| 05/22/2026 | PDSD Application Completeness Express | REVIEW COMPLETED |