Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Requires Resubmit
Review Details: PERMANENT SIGN REVIEW v.1
Permit Number - T22OT00754
Review Name: PERMANENT SIGN REVIEW v.1
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 11/07/2022 | Signs | REQUIRES RESUBMIT | RE: Sign review For: Wall sign replacements AT: 7805 E Broadway / Carl’s Jr. Sign permit: T22OT00754 Reviewer: H. Thrall (HEATHER.THRALL@TUCSONAZ.GOV) Date: 11/07/22 Codes: Unified Development Code (UDC) 7A Sign Standards, National Electrical Code (NEC), Tucson – Pima County Outdoor Lighting Code (OLC) and International Building Code (IBC) 2018 Please be assured that the total sign area proposed for the location is well within code. The following review comments are for the proper permit record and for the inspections process. 1. General a. Update the permit application with the correct city business license number for Allen Industries. (Separate number than the Contractor’s number. If you need assistance, call 520-791-4566.) 2. UDC 7A:10.2. General Business / Sign area by street front / building fronts a. Please provide the lot line frontage long Broadway at 225’ b. Please note from east building dining patio to west edge of drive thru lane frontage is 110’ along Broadway frontage 3. NEC / OLC: (several of these notes are for inspections purposes) a. For each sign A- C, list the volts, amps, and number of circuits b. For each sign A- C, list a note that states a lock out to be provided at disconnect switch c. Provide note that “all signs to shut off at midnight or business closure if later” (i.e they may have a drive thru that operates later) d. Add note how power supply mounted to wall e. Add note for location of breaker panel (i.e. is it in kitchen / riser room, etc.) f. Add note for location of timer (i.e. next to breaker panel) g. Add note that all sign circuits shall be labeled 4. IBC: a. Add note with information on how power supply attached / typical number size of attachments Sending contractor’s representative a copy of the marked plans with this set of review comments. UPLOAD PLAN REVISIONS ON YOUR CUSTOMER SERVICE PORTAL, UNDER THE PERMIT NUMBER T22OT00754 |