Permit Review Detail
Review Status: Requires Resubmit
Review Details: COMMERCIAL REVIEW - FULL v.2
Permit Number - T22CM06475
Review Name: COMMERCIAL REVIEW - FULL v.2
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 01/27/2023 | Bldg Permits - Post Review Express | PENDING ASSIGNMENT | |||
| 01/27/2023 | External Reviewers - SAFEBuilt | REQUIRES RESUBMIT | Activity Number: T22CM06475 & T22CM06476 GENERAL: Provide written responses to all review comments. Provide a complete plan set. Provide additional documents as requested by review staff. STRUCTURAL REVIEW COMMENTS: APPROVED BUILDING REVIEW COMMENTS: APPROVED MECHANICAL REVIEW COMMENTS: CONDITIONALLY APPROVED Although not shown, Clothes dryers shall be exhausted in accordance with the manufacturer's instructions. Dryer exhaust systems shall be independent of all other systems and shall convey the moisture and any products of combustion to the outside of the building as per IMC- 504.1 . Ducts shall not exceed the maximum length permitted. ELECTRICAL REVIEW COMMENTS APPROVED PLUMBING REVIEW COMMENTS: CONDITIONALLY APPROVED 12. Provide the Individual and branch-type air admittance valves shall be located not less than 4 inches above the horizontal branch drain or fixture drain. Stack-type air admittance valves shall be located not less than 6 inches above the flood level rim of the highest fixture being vented. The air admittance valve shall be located within the maximum developed length permitted for the vent. The air admittance valve shall be installed not less than 6 inches above insulation materials as per IPC-918.4 Location If you require additional clarification regarding these comments, please contact Doris Benoit at doris.benoit@tucsonaz.gov |
||
| 01/27/2023 | PDSD Application Completeness Express | REVIEW COMPLETED | Before this permit can be processed further fees must be paid. Please pay fees and then resubmit. |