Permit: TR-UTL-0526-00896
Permit Details
Status:
Issued
Type:
Right-of-Way (ROW) - Utility
Address:
1101 N WILMOT RD
Address NEW:
1101 N WILMOT RD
Apply Date:
05/28/2026
Applicant:
Ben Lozano / Border Traffic Safety LLC
Description:
Replace broken fire hydrant
Permit Reviews
Permit Number - TR-UTL-0526-00896
Permit Status: Issued
Permit Description: Replace broken fire hydrant
| Start Date | Submittal | Complete Date | Status |
|---|---|---|---|
| 06/09/2026 | RIGHT-OF-WAY REVIEW v.2 | 06/15/2026 | APPROVED |
| 05/28/2026 | RIGHT-OF-WAY REVIEW v.1 | 06/05/2026 | REQUIRES RESUBMIT |
Outstanding Activity Conditions
Permit Number - TR-UTL-0526-00896
Permit Status: Issued
Permit Description: Replace broken fire hydrant
Total Outstanding Activity Conditions - 6
| Date | Name |
|---|---|
| 05/28/2026 | Notify in writing at least 5 working days before work begins, any businesses, residences and public transit routes affected by your temporary traffic control. PROOF OF NOTIFICATION IS REQUIRED AT THE TIME OF THE PRECONSTRUCTION MEETING. |
| 05/28/2026 | PEDESTRIAN ACCESS MUST BE PROVIDED AND MAINTIANED PER MUTCD CHAPTER 6D. FIELD ADJUSTMENTS MAY BE REQUIRED. REPLACE/REPAIR SIDEWALK PANELS PER PAG STANDARD DETAIL 200\206 . PEDESTRIAN DETOUR ROUTE ON SAME SIDE OF RIGHT OF WAY TO BE PROVIDED. PER CITY CODE AND POLICY. Refer to MUTCD Chapter 6 Figure 6P-28, and 6K figure 6K-2. Refer to COT Utility manual Page 41 – 42 Refer to COT 2015 Addition to the MUTCD section 14 |
| 05/28/2026 | Pre- activity/construction meeting with City inspectors to be held 72 hours in advance of work start. Please request Inspections in your permit portal on TDC Online. |
| 06/10/2026 | Excavation - All excavations must be securely plated or backfilled at the end of each workday and during any period when the site is unattended. Plating shall be traffic-rated, flush with the surrounding surface, and properly secured to prevent movement and to maintain public safety |
| 06/15/2026 | Excavation - All excavations must be securely plated or backfilled at the end of each workday and during any period when the site is unattended. Plating shall be traffic-rated, flush with the surrounding surface, and properly secured to prevent movement and to maintain public safety |
| 06/15/2026 | Traffic Control Devices - Lane closures and street closures shall only be permitted during active work operations. At the end of each workday, the contractor shall remove all traffic control devices and reopen the roadway, bike lanes, and sidewalks to normal operation. Twenty-four (24) hour lane closures are not permitted unless specifically approved by the City. Traffic Control Devices shall not be stored in the bike lane or sidewalk |