Permit: TC-RES-1124-06939
Permit Details
Status:
Complete
Type:
Residential Building - One or Two Family
Address:
2631 N WALNUT AV
Address NEW:
2631 N WALNUT AV
Apply Date:
11/27/2024
Applicant:
Kyle Zimmermann
Description:
Upgrade 100amp-220volt main electrical service due to age and condition. Install (1) Cutler Hammer 200amp-220volt all-in-one main electrical service. Install new riser, TEP feeder cables, point-of-attachment, weather head and brace kit. Intercept all existing surface mounted conduits and wiring and install into new service. Install conduit over (2) existing exposed romex wires from eaves location and properly terminate into new main service. Staple exposed romex wiring up along eave above eight feet to be code compliant. (Additional estimate to be provided at owner request). Install new breakers for all existing branch circuitry to include (2) 30amp-220volt, (1) 30amp-110volt, and (4) 20amp-220volt Cutler Hammer circuit breakers. -Install (1) 200amp grounding system to include (2) groundrods boded to gas and water.
Permit Reviews
Permit Number - TC-RES-1124-06939
Permit Status: Complete
Permit Description: Upgrade 100amp-220volt main electrical service due to age and condition. Install (1) Cutler Hammer 200amp-220volt all-in-one main electrical service. Install new riser, TEP feeder cables, point-of-attachment, weather head and brace kit. Intercept all existing surface mounted conduits and wiring and install into new service. Install conduit over (2) existing exposed romex wires from eaves location and properly terminate into new main service. Staple exposed romex wiring up along eave above eight feet to be code compliant. (Additional estimate to be provided at owner request). Install new breakers for all existing branch circuitry to include (2) 30amp-220volt, (1) 30amp-110volt, and (4) 20amp-220volt Cutler Hammer circuit breakers.
-Install (1) 200amp grounding system to include (2) groundrods boded to gas and water.
| Start Date | Submittal | Complete Date | Status |
|---|---|---|---|
| 11/29/2024 | RESIDENTIAL SIMPLE REVIEW v.1 | 11/29/2024 | APPROVED |
Conditions
Permit Number - TC-RES-1124-06939
Permit Status: Complete
Permit Description: Upgrade 100amp-220volt main electrical service due to age and condition. Install (1) Cutler Hammer 200amp-220volt all-in-one main electrical service. Install new riser, TEP feeder cables, point-of-attachment, weather head and brace kit. Intercept all existing surface mounted conduits and wiring and install into new service. Install conduit over (2) existing exposed romex wires from eaves location and properly terminate into new main service. Staple exposed romex wiring up along eave above eight feet to be code compliant. (Additional estimate to be provided at owner request). Install new breakers for all existing branch circuitry to include (2) 30amp-220volt, (1) 30amp-110volt, and (4) 20amp-220volt Cutler Hammer circuit breakers.
-Install (1) 200amp grounding system to include (2) groundrods boded to gas and water.
| Date | Description | Comments |
|---|---|---|
| 11/29/2024 | Contractor with active Arizona Contractor's License for specified scope of work, or a signed Owner Builder Affidavit https://www.tucsonaz.gov/files/sharedassets/public/v/1/pdsd/documents/permits/residential-permits/pdsd_owner_builder_affidavit_081623.pdf, is required prior to issuance of permit. Contractor or Owner must have a TDC Online account and be added to the permit as the correct contact type https://www.tucsonaz.gov/files/sharedassets/public/v/2/pdsd/documents/tdc-faq/new-pdfs/adding-additional-contacts.pdf. If you are providing an Owner Builder Affidavit, the owner MUST be attached as a contact on the permit. |
Completed Inspections
Permit Status: Complete
Permit Number: TC-RES-1124-06939
Permit Description: Upgrade 100amp-220volt main electrical service due to age and condition. Install (1) Cutler Hammer 200amp-220volt all-in-one main electrical service. Install new riser, TEP feeder cables, point-of-attachment, weather head and brace kit. Intercept all existing surface mounted conduits and wiring and install into new service. Install conduit over (2) existing exposed romex wires from eaves location and properly terminate into new main service. Staple exposed romex wiring up along eave above eight feet to be code compliant. (Additional estimate to be provided at owner request). Install new breakers for all existing branch circuitry to include (2) 30amp-220volt, (1) 30amp-110volt, and (4) 20amp-220volt Cutler Hammer circuit breakers.
-Install (1) 200amp grounding system to include (2) groundrods boded to gas and water.
Total Completed Inspections - 2
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 01/16/2025 | BULD - Electrical Clearance | Passed | 1/16/25 approval for TEP INCR to reconnect for cutover and panel upgrade to 200Amps | |
| 01/16/2025 | COT - RSEL - Electrical Final | Passed | 1/16/25 pass |