Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit Details

Status:
Issued
Type:
Residential Building - One or Two Family
Address NEW:
1654 N BEVERLY AV
Apply Date:
10/19/2023
Applicant:
Marni Allen
Description:
We will have to cut 6" wide slit across the sidewalk and dig 18" trench from the meter to the exterior wall. We will run new 3/4" P.E pipe with steel risers and tracer wire in the trench and install new isolation valve at the side of the building. We will install new 3/4" by 1/2" black steel tee with 1/2" black steel pipe going over to water heater shed. We will run new 3/4" black steel pipe through the wall behind the range and refrigerator. This will require cutting 6" wide section of drywall to run from exterior wall to the range location. We will install, new gas valve and gas flex for the water heater and the range. We will install new sediment trap on the water heater control valve. Bring the water heater venting up to current code. We will install new carbon monoxide detector. Also, will install bonding wire between the gas line and water line.

Permit Reviews

Permit Number - TC-RES-1023-08922
Permit Status: Issued
Permit Description: We will have to cut 6" wide slit across the sidewalk and dig 18" trench from the meter to the exterior wall. We will run new 3/4" P.E pipe with steel risers and tracer wire in the trench and install new isolation valve at the side of the building. We will install new 3/4" by 1/2" black steel tee with 1/2" black steel pipe going over to water heater shed. We will run new 3/4" black steel pipe through the wall behind the range and refrigerator. This will require cutting 6" wide section of drywall to run from exterior wall to the range location. We will install, new gas valve and gas flex for the water heater and the range. We will install new sediment trap on the water heater control valve. Bring the water heater venting up to current code. We will install new carbon monoxide detector. Also, will install bonding wire between the gas line and water line.
Start Date Submittal Complete Date Status  
10/19/2023 RESIDENTIAL SIMPLE REVIEW v.1 10/20/2023 APPROVED Review Details

Conditions

Permit Number - TC-RES-1023-08922
Permit Status: Issued
Permit Description: We will have to cut 6" wide slit across the sidewalk and dig 18" trench from the meter to the exterior wall. We will run new 3/4" P.E pipe with steel risers and tracer wire in the trench and install new isolation valve at the side of the building. We will install new 3/4" by 1/2" black steel tee with 1/2" black steel pipe going over to water heater shed. We will run new 3/4" black steel pipe through the wall behind the range and refrigerator. This will require cutting 6" wide section of drywall to run from exterior wall to the range location. We will install, new gas valve and gas flex for the water heater and the range. We will install new sediment trap on the water heater control valve. Bring the water heater venting up to current code. We will install new carbon monoxide detector. Also, will install bonding wire between the gas line and water line.
Date Description Comments
10/20/2023 Contractor with active Arizona Contractor's License for specified scope of work, or a signed Owner Builder Affidavit https://www.tucsonaz.gov/files/sharedassets/public/v/1/pdsd/documents/permits/residential-permits/pdsd_owner_builder_affidavit_081623.pdf, is required prior to issuance of permit. Contractor or Owner must have a TDC Online account and be added to the permit as a contact. If you are providing an Owner Builder Affidavit, the owner MUST be attached as a contact on the permit.

Completed Inspections

Permit Status: Issued
Permit Number: TC-RES-1023-08922
Permit Description: We will have to cut 6" wide slit across the sidewalk and dig 18" trench from the meter to the exterior wall. We will run new 3/4" P.E pipe with steel risers and tracer wire in the trench and install new isolation valve at the side of the building. We will install new 3/4" by 1/2" black steel tee with 1/2" black steel pipe going over to water heater shed. We will run new 3/4" black steel pipe through the wall behind the range and refrigerator. This will require cutting 6" wide section of drywall to run from exterior wall to the range location. We will install, new gas valve and gas flex for the water heater and the range. We will install new sediment trap on the water heater control valve. Bring the water heater venting up to current code. We will install new carbon monoxide detector. Also, will install bonding wire between the gas line and water line.
Total Completed Inspections - 2
Date Description Inspector Results Comments
11/03/2023 COT - BULD - SWG Clearance Passed Approved gas piping and pressure test, SWG Clearance required for the reconnection
11/03/2023 COT - RSPL - Plumbing Final Passed

Documents

File Name Document Type  
COFT - PDSD - PERMIT CARD.PDF DOCUMENTS VIEW
1654 N BEVERLY[24880]_V1.PDF DOCUMENTS VIEW