Permit: TC-RES-0923-07748
Permit Details
Status:
Withdrawn
Type:
Residential Building - One or Two Family
Address:
7611 E SENECA ST
Address NEW:
7611 E SENECA ST
Apply Date:
09/04/2023
Applicant:
Gregory Chaisson
Description:
Demo the old ITE loadcenter and meter can, drive 2 new 5/8 inch grounding rods, and install new 200 amp main breaker nema 3r loadcenter with a new tep approved meter can. Run #4 bare copper to both grounding rods to the ground bar in the 200 amp loadcenter, then run #6 bare copper to the water/gas lines. I will cut the existing .5 inch pvc down then add a nema 3r single gang jbox to rerun with .5 inch emt to the 200 amp loadcenter. I will add all correct appropriate size overcurrent protection devices (breakers).
Permit Reviews
Permit Number - TC-RES-0923-07748
Permit Status: Withdrawn
Permit Description: Demo the old ITE loadcenter and meter can, drive 2 new 5/8 inch grounding rods, and install new 200 amp main breaker nema 3r loadcenter with a new tep approved meter can. Run #4 bare copper to both grounding rods to the ground bar in the 200 amp loadcenter, then run #6 bare copper to the water/gas lines. I will cut the existing .5 inch pvc down then add a nema 3r single gang jbox to rerun with .5 inch emt to the 200 amp loadcenter. I will add all correct appropriate size overcurrent protection devices (breakers).
| Start Date | Submittal | Complete Date | Status |
|---|---|---|---|
| 09/05/2023 | RESIDENTIAL SIMPLE REVIEW v.1 | 09/06/2023 | APPROVED |
Conditions
Permit Number - TC-RES-0923-07748
Permit Status: Withdrawn
Permit Description: Demo the old ITE loadcenter and meter can, drive 2 new 5/8 inch grounding rods, and install new 200 amp main breaker nema 3r loadcenter with a new tep approved meter can. Run #4 bare copper to both grounding rods to the ground bar in the 200 amp loadcenter, then run #6 bare copper to the water/gas lines. I will cut the existing .5 inch pvc down then add a nema 3r single gang jbox to rerun with .5 inch emt to the 200 amp loadcenter. I will add all correct appropriate size overcurrent protection devices (breakers).
| Date | Description | Comments |
|---|---|---|
| 09/05/2023 | Contractor with active Arizona Contractor's License for specified scope of work required prior to issuance of permit. Contractor must have a TDC Online account and be added to the permit as a contact. |
Completed Inspections
Permit Status: Withdrawn
Permit Number: TC-RES-0923-07748
Permit Description: Demo the old ITE loadcenter and meter can, drive 2 new 5/8 inch grounding rods, and install new 200 amp main breaker nema 3r loadcenter with a new tep approved meter can. Run #4 bare copper to both grounding rods to the ground bar in the 200 amp loadcenter, then run #6 bare copper to the water/gas lines. I will cut the existing .5 inch pvc down then add a nema 3r single gang jbox to rerun with .5 inch emt to the 200 amp loadcenter. I will add all correct appropriate size overcurrent protection devices (breakers).
Total Completed Inspections - 2
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 10/17/2023 | COT - RSEL - Electrical Final | Passed | ||
| 10/17/2023 | BULD - Electrical Clearance | Passed | Approved service panel upgrade, INCR Clearance was called into TEP at 11:20am |