Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit: TC-RES-0826-04611

Permit Details

Status:
Complete
Type:
Residential Building - One or Two Family
Address:
2533 N EDITH BL
Address NEW:
2533 N EDITH BL
Apply Date:
08/18/2026
Applicant:
Stephen Johnston
Description:
I will install a 100 amp all in one panel with a main 100 amp breaker and 16 to 24 spaces. I will install a new riser, weather head, point of attachment, brace kit with 2 5ft braces bolted to the roof and 1/0 aluminum feeder wire to supply up to 125 amps. I will then install 2 new 8ft 5/8 copper clad ground rods interconnected with 4 gauge copper ground wire and tied to the new panel. I'll also install new water and gas bonding interconnected together and tied to the the panel with #6 copper ground wire. I will install a 30 amp breaker to feed the interior panel and install any other breakers that are necessary for the apartment. I'll label the panel with a label maker and install a metal address label on the outside of the panel. I will seal any penetrations in the roof with a roofing jack and roofing sealant. Once power has been restored I will make sure that everything is working as it did before.

Permit Reviews

Permit Number - TC-RES-0826-04611
Permit Status: Complete
Permit Description: I will install a 100 amp all in one panel with a main 100 amp breaker and 16 to 24 spaces. I will install a new riser, weather head, point of attachment, brace kit with 2 5ft braces bolted to the roof and 1/0 aluminum feeder wire to supply up to 125 amps. I will then install 2 new 8ft 5/8 copper clad ground rods interconnected with 4 gauge copper ground wire and tied to the new panel. I'll also install new water and gas bonding interconnected together and tied to the the panel with #6 copper ground wire. I will install a 30 amp breaker to feed the interior panel and install any other breakers that are necessary for the apartment. I'll label the panel with a label maker and install a metal address label on the outside of the panel. I will seal any penetrations in the roof with a roofing jack and roofing sealant. Once power has been restored I will make sure that everything is working as it did before.
Start Date Submittal Complete Date Status  
08/19/2026 RESIDENTIAL SIMPLE REVIEW v.1 08/20/2026 APPROVED Review Details

Conditions

Permit Number - TC-RES-0826-04611
Permit Status: Complete
Permit Description: I will install a 100 amp all in one panel with a main 100 amp breaker and 16 to 24 spaces. I will install a new riser, weather head, point of attachment, brace kit with 2 5ft braces bolted to the roof and 1/0 aluminum feeder wire to supply up to 125 amps. I will then install 2 new 8ft 5/8 copper clad ground rods interconnected with 4 gauge copper ground wire and tied to the new panel. I'll also install new water and gas bonding interconnected together and tied to the the panel with #6 copper ground wire. I will install a 30 amp breaker to feed the interior panel and install any other breakers that are necessary for the apartment. I'll label the panel with a label maker and install a metal address label on the outside of the panel. I will seal any penetrations in the roof with a roofing jack and roofing sealant. Once power has been restored I will make sure that everything is working as it did before.
Date Description Comments
08/20/2026 Pre-Issuance - Required Documents - Contractor with active Arizona Contractor's License for specified scope of work, or a signed Owner Builder Affidavit is required prior to issuance of permit. The Affidavit form is available at https://www.tucsonaz.gov/Departments/Planning-Development-Services/Permits/Residential-Permits. Contractor or Owner must have a TDC Online account and be added to the permit as the correct contact type https://www.tucsonaz.gov/files/sharedassets/public/v/2/pdsd/documents/tdc-faq/new-pdfs/adding-additional-contacts.pdf. If you are providing an Owner Builder Affidavit, the owner MUST be attached as a contact on the permit.

Completed Inspections

Permit Status: Complete
Permit Number: TC-RES-0826-04611
Permit Description: I will install a 100 amp all in one panel with a main 100 amp breaker and 16 to 24 spaces. I will install a new riser, weather head, point of attachment, brace kit with 2 5ft braces bolted to the roof and 1/0 aluminum feeder wire to supply up to 125 amps. I will then install 2 new 8ft 5/8 copper clad ground rods interconnected with 4 gauge copper ground wire and tied to the new panel. I'll also install new water and gas bonding interconnected together and tied to the the panel with #6 copper ground wire. I will install a 30 amp breaker to feed the interior panel and install any other breakers that are necessary for the apartment. I'll label the panel with a label maker and install a metal address label on the outside of the panel. I will seal any penetrations in the roof with a roofing jack and roofing sealant. Once power has been restored I will make sure that everything is working as it did before.
Total Completed Inspections - 3
Date Description Inspector Results Comments
09/22/2026 RSEL - Electrical Progress Passed
09/22/2026 COT - RSEL - Electrical Final Passed
09/22/2026 BULD - Electrical Clearance Passed

Documents

File Name Document Type  
COFT - PDSD - PERMIT CARD (SSRS).PDF DOCUMENTS VIEW
100 AMP OVERHEAD 2533 EDITH (1)_V1.PDF DOCUMENTS VIEW