Permit: TC-RES-0825-04287
Permit Details
Status:
Inspections
Type:
Residential Building - One or Two Family
Address:
4356 E BURNS ST
Address NEW:
4356 E BURNS ST
Apply Date:
08/28/2025
Applicant:
Kyle Zimmermann
Description:
Remove existing main electrical service. Supply and install (1) Eaton Cutler Hammer 200amp-220volt all-in-one main electrical service. Install new riser, weather head, point-of-attachment, brace kit, and TEP feeder cables. Intercept existing exposed wire and conduits and properly install into new main electrical service. Install new breakers for all existing circuits to include (2) 60amp-220volt, (2) 30amp-220volt, and (2) 20amp-110volt Eaton Cutler Hammer circuit breakers. -Install (1) 200amp grounding system to include (2) ground rods bonded to gas and water.
Permit Reviews
Permit Number - TC-RES-0825-04287
Permit Status: Inspections
Permit Description: Remove existing main electrical service. Supply and install (1) Eaton Cutler Hammer 200amp-220volt all-in-one main electrical service. Install new riser, weather head, point-of-attachment, brace kit, and TEP feeder cables. Intercept existing exposed wire and conduits and properly install into new main electrical service. Install new breakers for all existing circuits to include (2) 60amp-220volt, (2) 30amp-220volt, and (2) 20amp-110volt Eaton Cutler Hammer circuit breakers.
-Install (1) 200amp grounding system to include (2) ground rods bonded to gas and water.
| Start Date | Submittal | Complete Date | Status |
|---|---|---|---|
| 08/29/2025 | RESIDENTIAL SIMPLE REVIEW v.1 | 08/29/2025 | APPROVED |
Conditions
Permit Number - TC-RES-0825-04287
Permit Status: Inspections
Permit Description: Remove existing main electrical service. Supply and install (1) Eaton Cutler Hammer 200amp-220volt all-in-one main electrical service. Install new riser, weather head, point-of-attachment, brace kit, and TEP feeder cables. Intercept existing exposed wire and conduits and properly install into new main electrical service. Install new breakers for all existing circuits to include (2) 60amp-220volt, (2) 30amp-220volt, and (2) 20amp-110volt Eaton Cutler Hammer circuit breakers.
-Install (1) 200amp grounding system to include (2) ground rods bonded to gas and water.
| Date | Description | Comments |
|---|---|---|
| 08/29/2025 | Contractor with active Arizona Contractor's License for specified scope of work, or a signed Owner Builder Affidavit is required prior to issuance of permit. The Affidavit form is available at https://www.tucsonaz.gov/Departments/Planning-Development-Services/Permits/Residential-Permits. Contractor or Owner must have a TDC Online account and be added to the permit as the correct contact type https://www.tucsonaz.gov/files/sharedassets/public/v/2/pdsd/documents/tdc-faq/new-pdfs/adding-additional-contacts.pdf. If you are providing an Owner Builder Affidavit, the owner MUST be attached as a contact on the permit. |
Completed Inspections
Permit Status: Inspections
Permit Number: TC-RES-0825-04287
Permit Description: Remove existing main electrical service. Supply and install (1) Eaton Cutler Hammer 200amp-220volt all-in-one main electrical service. Install new riser, weather head, point-of-attachment, brace kit, and TEP feeder cables. Intercept existing exposed wire and conduits and properly install into new main electrical service. Install new breakers for all existing circuits to include (2) 60amp-220volt, (2) 30amp-220volt, and (2) 20amp-110volt Eaton Cutler Hammer circuit breakers.
-Install (1) 200amp grounding system to include (2) ground rods bonded to gas and water.
Total Completed Inspections - 3
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 11/12/2025 | BULD - Electrical Clearance | Passed | 11.12.25 Approved for INCR code to TEP |
|
| 11/12/2025 | RSEL - Electrical Progress | Passed | ||
| 11/12/2025 | COT - RSEL - Electrical Final | Passed |