Permit: TC-RES-0526-02735
Permit Details
Status:
Inspections
Type:
Residential Building - One or Two Family
Address:
7312 E STELLA RD
Address NEW:
7312 E STELLA RD
Apply Date:
05/22/2026
Applicant:
Stephen Jobe
Description:
Trench from city meter to inlet at side of home approximately 100 feet Install new 1 inch gas main with code approved PE risers and PE piping. Reduce 1 inch down to three-quarter inch and cap at home side for pressure test, install pressure gauge and set the 15 pounds per code requirements Install code approved, yellow tracer wire for entire length of new gas line. Riser at house side will have a ball valve to terminate for testing and isolation for install of home Install new 3/4” gas line into home to connect to all gas fixtures.
Permit Reviews
Permit Number - TC-RES-0526-02735
Permit Status: Inspections
Permit Description: Trench from city meter to inlet at side of home approximately 100 feet
Install new 1 inch gas main with code approved PE risers and PE piping.
Reduce 1 inch down to three-quarter inch and cap at home side for pressure test, install pressure gauge and set the 15 pounds per code requirements
Install code approved, yellow tracer wire for entire length of new gas line.
Riser at house side will have a ball valve to terminate for testing and isolation for install of home
Install new 3/4” gas line into home to connect to all gas fixtures.
| Start Date | Submittal | Complete Date | Status |
|---|---|---|---|
| 05/27/2026 | RESIDENTIAL SIMPLE REVIEW v.2 | 05/27/2026 | APPROVED |
| 05/26/2026 | RESIDENTIAL SIMPLE REVIEW v.1 | 05/26/2026 | REQUIRES RESUBMIT |
Conditions
Permit Number - TC-RES-0526-02735
Permit Status: Inspections
Permit Description: Trench from city meter to inlet at side of home approximately 100 feet
Install new 1 inch gas main with code approved PE risers and PE piping.
Reduce 1 inch down to three-quarter inch and cap at home side for pressure test, install pressure gauge and set the 15 pounds per code requirements
Install code approved, yellow tracer wire for entire length of new gas line.
Riser at house side will have a ball valve to terminate for testing and isolation for install of home
Install new 3/4” gas line into home to connect to all gas fixtures.
| Date | Description | Comments |
|---|---|---|
| 05/26/2026 | Contractor with active Arizona Contractor's License for specified scope of work, or a signed Owner Builder Affidavit is required prior to issuance of permit. The Affidavit form is available at https://www.tucsonaz.gov/Departments/Planning-Development-Services/Permits/Residential-Permits. Contractor or Owner must have a TDC Online account and be added to the permit as the correct contact type https://www.tucsonaz.gov/files/sharedassets/public/v/2/pdsd/documents/tdc-faq/new-pdfs/adding-additional-contacts.pdf. If you are providing an Owner Builder Affidavit, the owner MUST be attached as a contact on the permit. |
Outstanding Inspections
Permit Status: Inspections
Permit Number: TC-RES-0526-02735
Permite Description: Trench from city meter to inlet at side of home approximately 100 feet
Install new 1 inch gas main with code approved PE risers and PE piping.
Reduce 1 inch down to three-quarter inch and cap at home side for pressure test, install pressure gauge and set the 15 pounds per code requirements
Install code approved, yellow tracer wire for entire length of new gas line.
Riser at house side will have a ball valve to terminate for testing and isolation for install of home
Install new 3/4” gas line into home to connect to all gas fixtures.
Total Outstanding Inspections - 2
| Last Inspection Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 06/01/2026 | COT - BULD - SWG Clearance | N/A | Canceled | 06/01/2026 Canceled at contractor request. |
| 06/01/2026 | COT - RSPL - Plumbing Final | N/A | Canceled | 06/01/2026 Canceled at contractor request. In process of changing BI to PE line in trench. |
Completed Inspections
Permit Status: Inspections
Permit Number: TC-RES-0526-02735
Permit Description: Trench from city meter to inlet at side of home approximately 100 feet
Install new 1 inch gas main with code approved PE risers and PE piping.
Reduce 1 inch down to three-quarter inch and cap at home side for pressure test, install pressure gauge and set the 15 pounds per code requirements
Install code approved, yellow tracer wire for entire length of new gas line.
Riser at house side will have a ball valve to terminate for testing and isolation for install of home
Install new 3/4” gas line into home to connect to all gas fixtures.
Total Completed Inspections - 2
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 06/03/2026 | COT - BULD - SWG Clearance | Passed | Passed CLEARANCE SWG | |
| 06/03/2026 | COT - RSPL - Plumbing Final | Passed | Passed CLEARANCE SWG |