Permit: TC-RES-0225-01062
Permit Details
Status:
Inspections
Type:
Residential Building - One or Two Family
Address:
1701 S AVENIDA REGULO
Address NEW:
1701 S AVENIDA REGULO
Apply Date:
02/26/2025
Applicant:
adam miranda
Description:
upgrading panel 100amp to 200amps
Permit Reviews
Permit Number - TC-RES-0225-01062
Permit Status: Inspections
Permit Description: upgrading panel 100amp to 200amps
| Start Date | Submittal | Complete Date | Status |
|---|---|---|---|
| 02/26/2025 | RESIDENTIAL SIMPLE REVIEW v.1 | 02/27/2025 | APPROVED |
Conditions
Permit Number - TC-RES-0225-01062
Permit Status: Inspections
Permit Description: upgrading panel 100amp to 200amps
| Date | Description | Comments |
|---|---|---|
| 02/26/2025 | Contractor with active Arizona Contractor's License for specified scope of work, or a signed Owner Builder Affidavit https://www.tucsonaz.gov/files/sharedassets/public/v/1/pdsd/documents/permits/residential-permits/pdsd_owner_builder_affidavit_081623.pdf, is required prior to issuance of permit. Contractor or Owner must have a TDC Online account and be added to the permit as the correct contact type https://www.tucsonaz.gov/files/sharedassets/public/v/2/pdsd/documents/tdc-faq/new-pdfs/adding-additional-contacts.pdf. If you are providing an Owner Builder Affidavit, the owner MUST be attached as a contact on the permit. |
Outstanding Inspections
Permit Status: Inspections
Permit Number: TC-RES-0225-01062
Permite Description: upgrading panel 100amp to 200amps
Total Outstanding Inspections - 1
| Last Inspection Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 03/21/2025 | COT - RSEL - Electrical Final | N/A | Not Ready |
Completed Inspections
Permit Status: Inspections
Permit Number: TC-RES-0225-01062
Permit Description: upgrading panel 100amp to 200amps
Total Completed Inspections - 1
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 03/21/2025 | BULD - Electrical Clearance | Passed | Approved 200A service panel upgrade - INCR Clearance to TEP is required for the cutover |