Permit: TC-RES-0126-00348
Permit Details
Status:
Inspections
Type:
Residential Building - One or Two Family
Address:
5450 E 7TH ST
Address NEW:
5450 E 7TH ST
Apply Date:
01/22/2026
Applicant:
Jeff Heisler
Description:
3 TON CONDENSER CHANGEOUT IN THE BACKYARD INCLUDING AN INDOOR COIL AND AN 80K BTUS FURNACE CHANGEOUT IN THE CLOSET.
Permit Reviews
Permit Number - TC-RES-0126-00348
Permit Status: Inspections
Permit Description: 3 TON CONDENSER CHANGEOUT IN THE BACKYARD INCLUDING AN INDOOR COIL AND AN 80K BTUS FURNACE CHANGEOUT IN THE CLOSET.
| Start Date | Submittal | Complete Date | Status |
|---|---|---|---|
| 01/22/2026 | RESIDENTIAL SIMPLE REVIEW v.1 | 01/23/2026 | APPROVED |
Conditions
Permit Number - TC-RES-0126-00348
Permit Status: Inspections
Permit Description: 3 TON CONDENSER CHANGEOUT IN THE BACKYARD INCLUDING AN INDOOR COIL AND AN 80K BTUS FURNACE CHANGEOUT IN THE CLOSET.
| Date | Description | Comments |
|---|---|---|
| 01/22/2026 | Contractor with active Arizona Contractor's License for specified scope of work, or a signed Owner Builder Affidavit is required prior to issuance of permit. The Affidavit form is available at https://www.tucsonaz.gov/Departments/Planning-Development-Services/Permits/Residential-Permits. Contractor or Owner must have a TDC Online account and be added to the permit as the correct contact type https://www.tucsonaz.gov/files/sharedassets/public/v/2/pdsd/documents/tdc-faq/new-pdfs/adding-additional-contacts.pdf. If you are providing an Owner Builder Affidavit, the owner MUST be attached as a contact on the permit. |
Outstanding Inspections
Permit Status: Inspections
Permit Number: TC-RES-0126-00348
Permite Description: 3 TON CONDENSER CHANGEOUT IN THE BACKYARD INCLUDING AN INDOOR COIL AND AN 80K BTUS FURNACE CHANGEOUT IN THE CLOSET.
Total Outstanding Inspections - 2
| Last Inspection Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 04/22/2026 | COT - RSME - Mechanical Final | N/A | Re-inspection required | 1-Vent connectors only have two screws; three are required. 2-thermostat wire is touching vent connector. 3-Wiring exiting furnace is rubbing on sharp edge of sheet metal body; provide condulet fitting to secure and protect conductors. |
| 04/22/2026 | RSBU - Building Final | N/A | Not Applicable |