Permit: TC-COM-1125-02044
Permit Details
Status:
Inspections
Type:
Commercial Building
Address:
1060 E MITCHELL ST
Address NEW:
1060 E MITCHELL ST
Apply Date:
11/05/2025
Applicant:
Daniel Belmonte
Description:
Removal of existing overhead fed 60 amp meter panel on power pole. • Install an in ground j box to intercept the existing circuits being fed from 60 amp panel. • Trench from in ground j box to the location of the new pedestal approximately 60- 70’ away. • Provide and install (1) 100 amp meter pedestal on provided 3’ x 3’ precast concrete pad. • Provide and install (2) 20 amp breakers. • Provide and install 1 ½” rigid conduit and 1 ½” PVC with (3) #10 CU XHHW and (1) #1 CU XHHW to refeed (2) 20 amp 120 volt existing circuits. • Provide engineering, prints, and permit. • Reach forklift and walk-behind trencher provided.
Permit Reviews
Permit Number - TC-COM-1125-02044
Permit Status: Inspections
Permit Description: Removal of existing overhead fed 60 amp meter panel on power pole.
• Install an in ground j box to intercept the existing circuits being fed from 60 amp panel.
• Trench from in ground j box to the location of the new pedestal approximately 60- 70’ away.
• Provide and install (1) 100 amp meter pedestal on provided 3’ x 3’ precast concrete pad.
• Provide and install (2) 20 amp breakers.
• Provide and install 1 ½” rigid conduit and 1 ½” PVC with (3) #10 CU XHHW and (1) #1 CU XHHW
to refeed (2) 20 amp 120 volt existing circuits.
• Provide engineering, prints, and permit.
• Reach forklift and walk-behind trencher provided.
| Start Date | Submittal | Complete Date | Status |
|---|---|---|---|
| 11/07/2025 | COMMERCIAL PDSD SIMPLE REVIEW v.2 | 11/07/2025 | APPROVED |
| 11/05/2025 | COMMERCIAL PDSD SIMPLE REVIEW v.1 | 11/06/2025 | REQUIRES RESUBMIT |
| 11/07/2025 | RESTAMP - COMMERCIAL v.1 | 11/10/2025 | APPROVED |
Conditions
Permit Number - TC-COM-1125-02044
Permit Status: Inspections
Permit Description: Removal of existing overhead fed 60 amp meter panel on power pole.
• Install an in ground j box to intercept the existing circuits being fed from 60 amp panel.
• Trench from in ground j box to the location of the new pedestal approximately 60- 70’ away.
• Provide and install (1) 100 amp meter pedestal on provided 3’ x 3’ precast concrete pad.
• Provide and install (2) 20 amp breakers.
• Provide and install 1 ½” rigid conduit and 1 ½” PVC with (3) #10 CU XHHW and (1) #1 CU XHHW
to refeed (2) 20 amp 120 volt existing circuits.
• Provide engineering, prints, and permit.
• Reach forklift and walk-behind trencher provided.
| Date | Description | Comments |
|---|---|---|
| 11/05/2025 | Contractor with active Arizona Contractor's License for specified scope of work required prior to issuance of permit. Contractor must have a TDC Online account and be added to the permit as a contact. |
Completed Inspections
Permit Status: Inspections
Permit Number: TC-COM-1125-02044
Permit Description: Removal of existing overhead fed 60 amp meter panel on power pole.
• Install an in ground j box to intercept the existing circuits being fed from 60 amp panel.
• Trench from in ground j box to the location of the new pedestal approximately 60- 70’ away.
• Provide and install (1) 100 amp meter pedestal on provided 3’ x 3’ precast concrete pad.
• Provide and install (2) 20 amp breakers.
• Provide and install 1 ½” rigid conduit and 1 ½” PVC with (3) #10 CU XHHW and (1) #1 CU XHHW
to refeed (2) 20 amp 120 volt existing circuits.
• Provide engineering, prints, and permit.
• Reach forklift and walk-behind trencher provided.
Total Completed Inspections - 2
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 02/18/2026 | COT - LCEL - Electrical Underground | Passed | ||
| 02/23/2026 | BULD - Electrical Clearance | Passed |