Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit: TC-COM-1122-00169
Permit Details
Apply Date:
11/25/2022
Applicant:
Cody Rutschman
Description:
Billboard Repair
Permit Reviews
Permit Number - TC-COM-1122-00169
Permit Status: Expired
Permit Description: Billboard Repair
| Start Date | Submittal | Complete Date | Status |
|---|---|---|---|
| 03/24/2023 | COMMERCIAL REVIEW - FULL v.2 | 04/24/2023 | REQUIRES RESUBMIT |
| 08/09/2023 | COMMERCIAL REVIEW - FULL v.3 | 09/06/2023 | REQUIRES RESUBMIT |
| 12/05/2023 | COMMERCIAL REVIEW - FULL v.4 | 01/04/2024 | APPROVED |
| 12/08/2022 | COMMERCIAL REVIEW - FULL v.1 | 02/10/2023 | REQUIRES RESUBMIT |
| 01/04/2024 | RESTAMP - COMMERCIAL v.1 | 01/04/2024 | APPROVED |
Outstanding Activity Conditions
Permit Number - TC-COM-1122-00169
Permit Status: Expired
Permit Description: Billboard Repair
Total Outstanding Activity Conditions - 3
| Date | Name |
|---|---|
| 01/04/2024 | Special inspections must be performed by an approved third party inspection agency at the owner's expense. Special inspection forms and reports are required to be submitted for review and approved prior to issuance of final approval documents. |
| 01/04/2024 | SPECIAL INSPECTION FOR HIGH STRENGTH BOLTING IS REQUIRED. |
| 01/04/2024 | The special inspector (or structural observer, as may be necessary) shall further confirm having been continuously present on site during: a) the removals of the south offset beam and the south supporting I-beam, b) the installation of the replacement south supporting I-beam, c) the attachment of the south offset I-beam to the replacement supporting I-beam, d) the disassembly and reassembly of the upper structure, and e) the reinstallation of the reassembled upper structure onto the two offset beams; the special inspector or structural observer shall also: 1) confirm that the finished depth of the replacement south supporting I-beam below grade matches the depth below grade of the existing south supporting I-beam upon removal and 2) confirm that the south offset beam and the two tapered uprights remained on site and were not replaced. The special inspection certificate(s) shall be submitted to PDSD for review and approval prior to final inspection approval. d. Light Fixture shall remain on site and be marked for identification by the special inspector. |
Conditions
Permit Number - TC-COM-1122-00169
Permit Status: Expired
Permit Description: Billboard Repair
| Date | Description | Comments |
|---|---|---|
| 01/04/2024 | Contractor with active Arizona Contractor's License for specified scope of work required prior to issuance of permit. Contractor must have a TDC Online account and be added to the permit as a contact. |