Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.

Permit: TC-COM-0523-01272

Permit Details

Status:
Issued
Type:
Commercial Building
Address:
3590 E CORONA RD
Apply Date:
05/15/2023
Applicant:
Fabien Reille
Description:
The Remote Gate Management (RGM) System Scope of Work is summarized as follows: 1. Install Advanced License Plate Readers (ALPR’s) x 6 (3 inbound/3 outbound). 2. Construct concrete pads x 6 (10’ x 10’ x 7”). 3. Install 25’ TQ pole for pole-mounted Bosch cameras x 3 with CAT6 cable from IDF room. 4. Manage installation of 25’ TQ pole with concrete reinforced bases (10’ x 2’ diameter) for Bosch cameras (amazon selected vendor). 5. Install RGM bollards x 8 (4 inbound/ 4 outbound). 6. Install barrier arm gates x 2. 7. Install guard rails. 8. Relocate existing fencing and provide new where needed. 9. Install new pole-mounted signage x 2. 10. Paint ground markings – water-based paint or acrylic with glass beads.

Permit Reviews

Permit Number - TC-COM-0523-01272
Permit Status: Issued
Permit Description: The Remote Gate Management (RGM) System Scope of Work is summarized as follows: 1. Install Advanced License Plate Readers (ALPR’s) x 6 (3 inbound/3 outbound). 2. Construct concrete pads x 6 (10’ x 10’ x 7”). 3. Install 25’ TQ pole for pole-mounted Bosch cameras x 3 with CAT6 cable from IDF room. 4. Manage installation of 25’ TQ pole with concrete reinforced bases (10’ x 2’ diameter) for Bosch cameras (amazon selected vendor). 5. Install RGM bollards x 8 (4 inbound/ 4 outbound). 6. Install barrier arm gates x 2. 7. Install guard rails. 8. Relocate existing fencing and provide new where needed. 9. Install new pole-mounted signage x 2. 10. Paint ground markings – water-based paint or acrylic with glass beads.
Start Date Submittal Complete Date Status  
07/07/2023 COMMERCIAL REVIEW - FULL v.3 08/03/2023 REQUIRES RESUBMIT Review Details
05/22/2023 COMMERCIAL REVIEW - FULL v.2 06/23/2023 REQUIRES RESUBMIT Review Details
04/22/2024 COMMERCIAL REVIEW - FULL v.1 04/22/2024 REQUIRES RESUBMIT Review Details
02/05/2024 COMMERCIAL REVIEW - FULL v.2 02/06/2024 REQUIRES RESUBMIT Review Details
10/23/2023 RESTAMP - COMMERCIAL v.1 10/30/2023 APPROVED Review Details
06/14/2024 BUILDING DEFERRED SUBMITTAL REVIEW v.1 06/14/2024 REQUIRES RESUBMIT Review Details
04/30/2024 COMMERCIAL REVIEW - FULL v.2 05/06/2024 APPROVED Review Details
09/28/2023 COMMERCIAL REVIEW - FULL v.4 10/23/2023 APPROVED Review Details
06/24/2024 BUILDING DEFERRED SUBMITTAL REVIEW v.2 06/24/2024 REQUIRES RESUBMIT Review Details
05/18/2023 COMMERCIAL REVIEW - FULL v.1 05/18/2023 REQUIRES RESUBMIT Review Details
03/25/2024 COMMERCIAL REVIEW - FULL v.3 04/12/2024 APPROVED Review Details
01/08/2024 COMMERCIAL REVIEW - FULL v.1 02/05/2024 REQUIRES RESUBMIT Review Details

Conditions

Permit Number - TC-COM-0523-01272
Permit Status: Issued
Permit Description: The Remote Gate Management (RGM) System Scope of Work is summarized as follows: 1. Install Advanced License Plate Readers (ALPR’s) x 6 (3 inbound/3 outbound). 2. Construct concrete pads x 6 (10’ x 10’ x 7”). 3. Install 25’ TQ pole for pole-mounted Bosch cameras x 3 with CAT6 cable from IDF room. 4. Manage installation of 25’ TQ pole with concrete reinforced bases (10’ x 2’ diameter) for Bosch cameras (amazon selected vendor). 5. Install RGM bollards x 8 (4 inbound/ 4 outbound). 6. Install barrier arm gates x 2. 7. Install guard rails. 8. Relocate existing fencing and provide new where needed. 9. Install new pole-mounted signage x 2. 10. Paint ground markings – water-based paint or acrylic with glass beads.
Date Description Comments
10/30/2023 Contractor with active Arizona Contractor's License for specified scope of work required prior to issuance of permit. Contractor must have a TDC Online account and be added to the permit as a contact.

Outstanding Inspections

Permit Status: Issued
Permit Number: TC-COM-0523-01272
Permite Description: The Remote Gate Management (RGM) System Scope of Work is summarized as follows: 1. Install Advanced License Plate Readers (ALPR’s) x 6 (3 inbound/3 outbound). 2. Construct concrete pads x 6 (10’ x 10’ x 7”). 3. Install 25’ TQ pole for pole-mounted Bosch cameras x 3 with CAT6 cable from IDF room. 4. Manage installation of 25’ TQ pole with concrete reinforced bases (10’ x 2’ diameter) for Bosch cameras (amazon selected vendor). 5. Install RGM bollards x 8 (4 inbound/ 4 outbound). 6. Install barrier arm gates x 2. 7. Install guard rails. 8. Relocate existing fencing and provide new where needed. 9. Install new pole-mounted signage x 2. 10. Paint ground markings – water-based paint or acrylic with glass beads.
Total Outstanding Inspections - 2
Last Inspection Date Description Inspector Results Comments
05/29/2024 COT - LCEL - Electrical Underground N/A Partial Pass 4/30/24: Southeast (outbound lanes) (5) 3" Conduits for ALPR systems at north outbound lane complete and ok to backfill.
5/1/24: southeast (outbound lanes) (4) 3" conduit from ALPR tri-pod to NEMA north outbound lane next to security structure complete ok to backfill
5/8/24: southeast (outbound lane) (4) 3" conduits from ALPR tri-pod to nema On east side of security structure complete. Ok to backfill
5/29/24: Northwest (inbound lanes) 2 south lanes electrical underground per plans ok to proceed.
06/18/2024 COT - HCBU - TCO N/A Not Applicable

Completed Inspections

Permit Status: Issued
Permit Number: TC-COM-0523-01272
Permit Description: The Remote Gate Management (RGM) System Scope of Work is summarized as follows: 1. Install Advanced License Plate Readers (ALPR’s) x 6 (3 inbound/3 outbound). 2. Construct concrete pads x 6 (10’ x 10’ x 7”). 3. Install 25’ TQ pole for pole-mounted Bosch cameras x 3 with CAT6 cable from IDF room. 4. Manage installation of 25’ TQ pole with concrete reinforced bases (10’ x 2’ diameter) for Bosch cameras (amazon selected vendor). 5. Install RGM bollards x 8 (4 inbound/ 4 outbound). 6. Install barrier arm gates x 2. 7. Install guard rails. 8. Relocate existing fencing and provide new where needed. 9. Install new pole-mounted signage x 2. 10. Paint ground markings – water-based paint or acrylic with glass beads.
Total Completed Inspections - 8
Date Description Inspector Results Comments
05/06/2024 COT - LCBU - Preslab Passed
06/04/2024 COT - LCEL - Electrical Underground Passed 4/30/24: Southeast (outbound lanes) (5) 3" Conduits for ALPR systems at north outbound lane complete and ok to backfill.
5/1/24: southeast (outbound lanes) (4) 3" conduit from ALPR tri-pod to NEMA north outbound lane next to security structure complete ok to backfill
5/8/24: southeast (outbound lane) (4) 3" conduits from ALPR tri-pod to nema On east side of security structure complete. Ok to backfill
5/29/24: Northwest (inbound lanes) 2 south lanes electrical underground per plans ok to proceed.
6/4/24: north west (inbound lanes) 1 on north side of security office electrical underground per plan
06/17/2024 COT - FCON - Fire - Final Passed
06/18/2024 COT - LCBU - Building Final Passed 5/21/24: Ok for TCO level 4 on south side only.
6/18/24: CofO passed
06/18/2024 ENGR Engineering Final Passed Super had to move one stop sign and pole out from the center of the circulation path.
06/18/2024 COT - HCBU - Excavation/Rebar/Zoning Passed
06/18/2024 COT - LCEL - Electrical Final Passed
06/18/2024 COT - LCEL - Grounding/Bonding Passed

Documents

File Name Document Type  
COFT - PDSD - PERMIT CARD.PDF DOCUMENTS VIEW
CONS-REVISED IMPROVEMENT PLANS_TUS5 RGM_4-29-2024_V4.PDF DOCUMENTS VIEW
CONS-CONS-REV_3_CON PLAN SET_TUS5_V3_V4.PDF DOCUMENTS VIEW
TUS5 RGM RESUBMITTAL NARRATIVE 3-26-2024_V2.PDF DOCUMENTS VIEW
COFT - PDSD - PERMIT CARD.PDF DOCUMENTS VIEW
CONS-CONS-CIVIL IMPROVEMENT PLANS - TUS5-RGM PN_23-011_V4_V4.PDF DOCUMENTS VIEW