Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit: T97CM01196
Permit Details
Apply Date:
05/08/1997
Applicant:
BACH HOWARD A & PATRICIA L TR
Description:
ADDITION:GARAGE & WORKSHOP
Completed Inspections
Permit Status: Final
Permit Number: T97CM01196
Permit Description: ADDITION:GARAGE & WORKSHOP
Total Completed Inspections - 4
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 12/29/1998 | ELECTRIC - INTERMEDIATE | RFREIDIN | Approved | NOT READY FOR INSPECTION |
| 12/29/1998 | ELECTRIC - INTERMEDIATE | RFREIDIN | Approved | ADDTL COMMS - 1. CALL FOR ELECT INTERMEDIATE WHEN THE ROOF IS ON. YOU NEED TO RUN ALL ROMEX MAKE UP BOXES. IF METAL, REQUIRE BOND JUMPER. B) COUNTER TO BE ON 20 AMP CIRCUIT. C) LIGHTING CIRCUITS. D) CHECK WATTAGE DEMANDS OF ALL EQUIPMENT BEFORE RUNNING WIRE. E) GARAGE REQUIRES GFCI OUTLET MINIMUM (1) IF MORE THAN ONE ALL OUTLETS TO BE GFCI PROTECTED. F) YOU NEED AN INSPECTION ON FEEDER FROM SERV. TO NEW PANEL BOARD INSTALLED. ISOLATEE NEUTRALS AND GROUNDS AT NEW PANEL. IF 4 WIRE FEEDER RUN GRD/ROD NOT REQUIRED AT NEW PANEL. G) GOOD ADVICE WOULD BE TO INSTALL ALL OUTLETS BEFORE COVERING WITH SHEET ROCK TO VERIFY EVERYTHING WORKS. 3. ALL BOTTOM PLATES FOR FRAMING ARE TO BE TREATED LUMBER. YOU NEED TO COAT WITH COPPER CHROMATE OR EQUAL. |
| 05/03/1999 | FRAMING | RFREIDIN | Approved | IVRS - Inspection 0000* |
| 05/03/1999 | FRAMING | RFREIDIN | Approved | ADDTL COMMS - ROOF RAFTERS IN PLACE |