Permit: T16OT01118
Permit Details
Apply Date:
09/13/2016
Applicant:
SIGN AGE INC
Description:
2-NON ILLUM WALL SIGNS
Completed Inspections
Permit Status: Final
Permit Number: T16OT01118
Permit Description: 2-NON ILLUM WALL SIGNS
Total Completed Inspections - 2
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 09/14/2016 | SIGN SITE REVIEW | ACONNOR | Approved | The signs indicated on the application would not be considered wall signs according the following definition: Sec. 3-11. Definitions Wall sign. Any sign that is fastened, attached, connected or supported in whole or in part by a building, other than a sign structure supported wholly by the ground, with the exposed face of the sign in a plane parallel to the plane of the wall. The following applies to freestanding signs: Freestanding sign. An on-site sign or three-dimensional representation of a figure or object, not attached to any building, supported by uprights or braces or some other approved support that is capable of withstanding the stress from weight and wind load. Sec. 3-61. Freestanding signs. A. Monument type sign, general requirements: 1. Maximum faces: Four (4) per sign. 2. Maximum area: Fifty (50) square feet per face. 3. Maximum height: Ten (10) feet from grade. 4. Minimum setback: Twenty (20) feet from curb to leading edge of sign. B. Low profile type sign, general requirements: 1. Maximum faces: Two (2) per sign. 2. Maximum area: Sixty (60) square feet per face. 3. Maximum height: Eight (8) feet, or less than eight (8) feet if the setback from the curb is less than sixteen (16) feet. Freestanding signs must include with submittal: Site plan indicating street frontage, property lines, sight visibility triangles, proposed and existing rights-of-way, location of sign on property and relationship of proposed sign to ingress and egress points. Revise application and documents as necessary to meet the criteria of a freestanding sign. Additional comments may apply upon subsequent reviews. |
| 08/03/2017 | SIGN SELF CERTIFICATION INSP | ACONNOR | Approved |