Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit: T15OT00049
Permit Details
Apply Date:
01/13/2015
Applicant:
DESIGN AND SIGN CO LLC
Description:
T15SA00036 (HPZ 15-10/RND 15-03) / TRE 2015-036A / (1) INTERNALLY ILLUM PROJ SIGN @ 10.32 SQFT N. ELEV
Contractors:
- DESIGN AND SIGN CO LLC
Outstanding Inspections
Permit Status: Expired
Permit Number: T15OT00049
Permite Description: T15SA00036 (HPZ 15-10/RND 15-03) / TRE 2015-036A / (1) INTERNALLY ILLUM PROJ SIGN @ 10.32 SQFT N. ELEV
Total Outstanding Inspections - 3
| Last Inspection Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 05/29/2015 | SIGN SHOP | N/A | Not ready for Inspection | |
| 05/29/2015 | SIGN ELECTRIC | N/A | Not ready for Inspection | THIS SIGN COMPANY IS NOT UL LISTED SO THIS SIGN NEEDS TO HAVE A SHOP INSPECTION PERFORMED ON IT. THIS WILL BE RESCHEDULED AT A LATER DATE. |
| 05/29/2015 | SIGN INSPECTION | N/A | Not ready for Inspection | SIGN SHOP INSPECTION NEEDS TO BE COMPLETED AND THE SIGN NEEDS TO BE HUNG FROM THE WALL. THERE IS A QUESTION ABOUT IF THE SIGN WILL MEET THE STANDARDS, IT IS OVER 4 FEET TALL AND NEEDS TO BE HUNG WHERE IT IS 8 FEET OFF THE GROUND AND NO MORE THAN 12 ABOVE THE FINISH GRADE. I HAVE ADVISED THE CONTRACTOR TO CONTACT GLENN MOYER ABOUT HIS NOT MEETING ALL THE STIPULATIONS. GLENN MOYER WAS NOTIFIED OF THE FOLLOWING BY ME ON 5/29 VIA E-MAIL Glenn This is the sign that the contractor called you on earlier. The height of the sign is 49 & 1/4 inches, is there a stipulation that it can not exceed either of the required dimensions. I have been advised that this sign needs to be no larger than 48 inches since their is a limit that it cannot have a clearance less than 8 feet (96 inches) and cannot be taller than 12 feet (144 inches). If they hold at 8 feet of clearance can they go above 12 feet, or if they maintain the top of sign at 12 feet can they be less than 8 feet on the pedestrian clearance? I don't need to face the Board of Inquiry of why it passed out of spec. Thanks David HE RESPONDED LATER THAT DAY WITH THE FOLLOWING INFORMATION Okay to go the 1.25 inches higher. Hold the eight feet clearance. Glenn Moyer, AICP THIS INSPECTION WILL BE SCHEDULED AT A LATER DATE FOR THE FINAL INSPECTION. |
Completed Inspections
Permit Status: Expired
Permit Number: T15OT00049
Permit Description: T15SA00036 (HPZ 15-10/RND 15-03) / TRE 2015-036A / (1) INTERNALLY ILLUM PROJ SIGN @ 10.32 SQFT N. ELEV
Total Completed Inspections - 1
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 05/27/2015 | SIGN SITE REVIEW | ACONNOR | Approved | HISTORIC REVIEW APPROVAL LETTER MARCH 4, 2015 UNDER CASE T15SA00036 (HPZ 15-10/RND 15-03) & TRE ISSUED UNDER CASE 2015-036A |