Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit: T01CM01901
Permit Details
Apply Date:
04/20/2001
Applicant:
N/A
Description:
REMODEL:LASER TAG FACILITY
Contractors:
- EPSTEIN FENTON L L C ,
Permit Reviews
Permit Number - T01CM01901
Permit Status: Final
Permit Description: REMODEL:LASER TAG FACILITY
Start Date | Submittal | Complete Date | Status |
---|---|---|---|
04/20/2001 | 3RD PARTY COMMERCIAL TI | 08/15/2001 | COMPLETED |
Completed Inspections
Permit Status: Final
Permit Number: T01CM01901
Permit Description: REMODEL:LASER TAG FACILITY
Total Completed Inspections - 18
Date | Description | Inspector | Results | Comments |
---|---|---|---|---|
09/06/2001 | STEM WALL/RETAINING WALL | EMONAHAN | Approved | NO STEMS ON JOB. |
10/01/2001 | EXT METAL CLIPS/EXT SHEATHING | EMONAHAN | Approved | IVRS - Inspection 0000$NO SHEETING ON THIS JOB |
10/01/2001 | BUILDING PRE-SLAB | EMONAHAN | Approved | IVRS - Inspection 0000$NO PRE-SLAB AS JOB |
10/01/2001 | EXCAVATION/LAYOUT REBAR & ZON | EMONAHAN | Approved | IVRS - Inspection 0000* |
10/19/2001 | BUILDING ABOVE CEILING | DWITT | Approved | IVRS - Inspection 0000* |
10/19/2001 | FRAMING | DWITT | Approved | IVRS - Inspection 0000* |
10/22/2001 | RIGHT OF WAY - FINAL | ENGINEER | Approved | |
10/22/2001 | SIGN - FINAL | JYBARRA | Approved | IVRS - Inspection 0000* |
10/23/2001 | ENGINEERING - FINAL | DROBERTS | Approved | |
10/25/2001 | MECHANICAL - ABOVE CEILING | CWILLIAM | Approved | IVRS - Inspection 0000* |
10/30/2001 | MECHANICAL - FINAL | CWILLIAM | Approved | IVRS - Inspection 0000* |
10/30/2001 | MECHANICAL - INTERMEDIATE | CWILLIAM | Approved | IVRS - Inspection 0000* |
10/31/2001 | ELECTRIC - ABOVE CEILING | RHOLLAND | Approved | IVRS - Inspection 0000* |
10/31/2001 | ELECTRIC - INTERMEDIATE | RHOLLAND | Approved | IVRS - Inspection 0000*1.) EXPOSED CONDUCTOR END OF FIXTURE 2.) NEED TO SEE STROBE SIREN BREIFING ROOM 3.) MISSING LIGHT BREIFING ROOM 4.) USE CORRECT BREAKER PP-3 5.) LABEL PANEL 6.) USE APPROVED WIRE MOLD PARTS AND TEMANATE CONDUIT TO END CAP FOR MAINTAINING MECHANICAL CONTINUITY 7.) EMERGENCY LIGHTING COVERED. 8.) WORKING CLEARANCE IN FRONT DISCONNECT HP-1 ROOF. 9.) SUPPORT SEALTITE.10.) LOOSE SEATITE FITTINGS 11.) CK EXIT LIGHT OPERATION. |
11/02/2001 | SHEET ROCK NAILING | EMONAHAN | Approved | IVRS - Inspection 0000* |
11/04/2001 | ELECTRIC - FINAL | RHOLLAND | Approved | IVRS - Inspection 0000*OK FINAL. |
11/05/2001 | BUILDING - FINAL | EMONAHAN | Approved | IVRS - Inspection 0000* |
11/06/2001 | PERMIT FINALED | EMONAHAN | Approved |