Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

PRO is currently experiencing an outage. Some documents and records may not be available on PRO momentarily. We apologize for the inconvenience and are working to restore full access.

Inspection Status: Re-inspection required

Inspection History: RSBU - Building Final 

Date Description Inspector Results Comments
09/26/2023 RSBU - Building Final  Re-inspection required Pass all other inspections.
09/28/2023 RSBU - Building Final  Re-inspection required 9/28/23: HVAC unit not installed.

9/28/23:1-Rear setback is 4' 5" to adjacent mobile; no drive as shown on plans. 2-Front setback is 5' to drive; plans shows 6'.
RSBU - Building Final  Re-inspection required 10/3/23: revise plans to reflect placement of mobile home
10/04/2023 RSBU - Building Final  Re-inspection required 10/4/2023 awning not per plans. Provide a set of approved plans to the site . Awning is being constructed, provide scope of footings. Trenches are still open gas and electrical needs too be green tagged.
10/05/2023 RSBU - Building Final  Re-inspection required (with fee) 9/28/23: HVAC unit not installed.

9/28/23:1-Rear setback is 4' 5" to adjacent mobile; no drive as shown on plans. 2-Front setback is 5' to drive; plans shows 6'.

10/3/23: revise plans to reflect placement of mobile home

10/4/2023 awning not per plans. Provide a set of approved plans to the site . Awning is being constructed, provide scope of footings. Trenches are still open gas and electrical needs too be green tagged.

10/5/23: awning not per plans. Provide a set of approved plans to the site . Awning is being constructed, provide scope of footings. Trenches are still open gas and electrical needs too be green tagged. AC units needs lock out caps on refrigerant lines.
10/17/2023 RSBU - Building Final  Re-inspection required (with fee) corrections not completed
10/19/2023 RSBU - Building Final  Re-inspection required 10/19/23: corrections not completed