Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Re-inspection required
Inspection History: COT - RSBU - Exterior/Interior Clips/Sheathing/Framing
Permit Number - TC-RES-0624-03791
Inspection Description - COT - RSBU - Exterior/Interior Clips/Sheathing/Framing
Inspection Status - Re-inspection required
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 06/16/2025 | COT - RSBU - Exterior/Interior Clips/Sheathing/Framing | Re-inspection required | Missing Htt4 holdowns per schedule. Loose anchor bolts throughout. Missing nuts and washers and bolts. Two pins required at bottom plate greater than 12" and 6" from edges. Add anchor bolts throughout no more than 12" from edges. Add nails throughout at shear walls being penetrated more than 1/8". Interior shear wall nailing not per schedule. Connection from beam to post not per plan. Missing nails at post cap. Stopped inspection other items may occur. 6/16/2025 | |
| 07/09/2025 | COT - RSBU - Exterior/Interior Clips/Sheathing/Framing | Re-inspection required | Missing Htt4 holdowns per schedule. Loose anchor bolts throughout. Missing nuts and washers and bolts. Two pins required at bottom plate greater than 12" and 6" from edges. Add anchor bolts throughout no more than 12" from edges. Add nails throughout at shear walls being penetrated more than 1/8". Interior shear wall nailing not per schedule. Connection from beam to post not per plan. Missing nails at post cap. Stopped inspection other items may occur. 6/16/2025 7/9/25: Anchor bolt spacing not per plan at marked locations, shot pins required at interior walls at marked locations, exterior shear walls not fastened per schedule, nailing must be 3/8" from edge and penetrate no more than 1/8". HTT4 must be properly secured. |
|
| 08/05/2025 | COT - RSBU - Exterior/Interior Clips/Sheathing/Framing | Passed | All corrections were made. Approved. 8/5/2025 |