Inspection History Details
Inspection Status: Not Ready
Inspection History: COT - RSME - Mechanical Final
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 06/02/2025 | COT - RSME - Mechanical Final | Not Ready | ||
| 07/08/2025 | COT - RSME - Mechanical Final | Re-inspection required | 7-8-25: arch fault breakers are required for habitable areas including kitchens, living rooms, bedrooms, hallways, playrooms, kitchen receptacles must be gfci/arch fault, missing hammer arrestors at laundry room, missing anti tip device for stove, paint all exterior plastic (pvc/abs), pressure relieve valve on water heater must be cvpvc or copper, install shackle on water heater breaker, no water pressure on fixtures, thermostat must be no higher than 48" o.c., no hammer arrestors on dishwasher, screw/install back plates on kitchen sink, wrought iron gate leading to existing pool must be 54" to the latch and must be self closing, ASTM F2208 pool alarms are required at back door, install address identification on house-see code requirements for details and provide a ladder for roof access. | |
| 07/14/2025 | COT - RSME - Mechanical Final | Re-inspection required | 7-14-25: missing hammer arrestors on dishwasher, wrought iron gate leading to existing pool must be 54" o.c. to the latch & install pool alarm on back door( ASTM 2208F for details) ,install address identification on home and provide a ladder for roof access. | |
| 07/23/2025 | COT - RSME - Mechanical Final | Re-inspection required (with fee) | 7.23.25 arc fault breakers still missing Open knockout at panel must be sealed Acorn at grounding not secured Alarms missing at window and exterior door leading to pool area Gap between gate post and building cannot exceed 4" Pool gate must have self closing device properly installed so it self closes All exterior plastic/pvc must be painted INSPECTION STOPPED MORE ITEMS MAY BE ADDED |
|
| 07/30/2025 | COT - RSME - Mechanical Final | Passed | 7-30-25: mechanical final approved. |