Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Partial Pass
Inspection History: COT - RSBU - Exterior/Interior Clips/Sheathing/Framing
Permit Number - TC-RES-0223-02892
Inspection Description - COT - RSBU - Exterior/Interior Clips/Sheathing/Framing
Inspection Status - Partial Pass
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 03/20/2024 | COT - RSBU - Exterior/Interior Clips/Sheathing/Framing | Partial Pass | Provide verification from Engineer of Record that hanger in garage is adequate to support load imposed by two-ply girder to Microlam, that microlam connection(s) to I-joists at cantilever are adequate to transmit gravity loads imposed by garage trusses and girder connected to microlam by hangers to the bearing wall, and that platform framing in great room is acceptable in lieu of the balloon framing shown on plans. OK to proceed at own risk; reschedule with Intermediate, or before if additional requested engineering does not support proceeding. |
|
| 04/22/2024 | COT - RSBU - Exterior/Interior Clips/Sheathing/Framing | Not Ready | Remove all insulation and netting from framing to allow inspection. | |
| 04/24/2024 | COT - RSBU - Exterior/Interior Clips/Sheathing/Framing | Passed | 4/24/24: all netting and insulation have been removed for inspection. Simpson hanger has been added to support beam in garage and full span ledger board has been installed to end of TJI Floor joists for 2nd floor. All mechanical, electrical, and plumbing rough-in is complete. Okay to proceed with installation of insulation and drywall on entire house. | |
| 07/29/2024 | COT - RSBU - Exterior/Interior Clips/Sheathing/Framing | Passed | Passed 4/24/24 by R. Mellecker. |