Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Re-inspection required
Inspection History: COT - RSME - Mechanical Final
Permit Number - TC-MDP-1024-01242
Inspection Description - COT - RSME - Mechanical Final
Inspection Status - Re-inspection required
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 06/26/2025 | COT - RSME - Mechanical Final | Re-inspection required | 6/26/25: Exterior plastic piping must be coated for UV protection, seal around stucco at T&P termination, T&P shall terminate no higher than6" above finish grade or no lower than 2x pipe diameter (finished grade not complete), properly secure dryer exhaust vent cap, aluminum conductors required Noalax, properly secure liquid tight at roof for A/C disconnect. Main panel schedule not complete/incorrect, open ground at east bedroom, anti-tip at range, pending engineering final, A/C unit is being over amped. | |
| 07/15/2025 | COT - RSME - Mechanical Final | Passed | 7-15-25: corrections made-mechanical & building finals approved. |