Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Inspection Status: Re-inspection required

Inspection History: COT - RSBU - Exterior/Interior Clips/Sheathing/Framing

Date Description Inspector Results Comments
07/06/2026 COT - RSBU - Exterior/Interior Clips/Sheathing/Framing Re-inspection required 7/6/26: TRIMMERS TO KING REQUIRE FASTENERS @ 8" o.c at garage opening, RSP4 required at 32" spacing throughout, masa clips must be 4" away from edge of sill plate, anchor bolt required with 12" of sill plate,fasteners required at shiners at sw9, stdh10 must have all fasteners properly installed at 2x4, 2 continuous masa clips with leg up, back beam seat and full size king missing per plan, ledger at back porch required to have 4b(16D nails at 24" o.c, fasteners at sw9 required to be 6" and 12" and shall be no more than 3/8" from edge and shall not penetrate more than 1/8" of inch, anchor bolts shall be in middle third of sill plate, rsp4 clip at window opening, SW11 at kitchen fastener missing throughout, properly secure all king to studs to trimmer per plans, properly secure shear wall at top plate at bedroom #2,properly fasten built-up header at living room window, ledger in master bedroom must be properly fastened, cripple stud at master bedroom door opening required, SDPW SCREW SCREW REQUIRED 48"o.c and shall be properly installed, top plate splices must be properly fastened throughout per detail 07., A35 clip required at shear to truss connection and bracing per detail 303, gable end bracing at kitchen and master must be properly installed per detail, double girder needs double studs, hanger required at garage truss, STOPPED INSPECTION ROOF NAILING WAS NOT WALKED.
07/08/2026 COT - RSBU - Exterior/Interior Clips/Sheathing/Framing Passed 07/08/2026
Corrections made, walked roof.