Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.

Inspection History Details

Permit: T21OT00586

Parcel: 14026038A

Inspection Status: Passed

Inspection History: COT - ENGR - Signage Final

Permit Number - T21OT00586

Inspection Description - COT - ENGR - Signage Final

Inspection Status - Passed

Date Description Inspector Results Comments
08/23/2021 COT - ENGR - Signage Final Hthrall Approved Entered by HTHRALL1 - Revised plans submitted 08/23/21 were approved.
08/18/2021 COT - ENGR - Signage Final Hthrall Partial Approval Entered by HTHRALL1 - RE: sign permit review For: new wall signs / change copy on freestanding signs AT: Walmart / 2565 E Commerce Center Pl Sign Permit: T21OT00586 Reviewer: H. Thrall Date: 08/18/21 Permit status: partial approval Codes: Unified Development Coe Sign Standards 7A, National Electrical Code (NEC), Tucson-Pima County Outdoor Lighting Code (OLC), International Building Code (IBC 2018). 1. UDC 7A: Sign area proposed is within allowance for industrial zoning of premises. 2. NEC 600: A) Shut off switch locations- add note where the collective shut off supply is - i.e. at breaker panel, riser room - etc. B) FYI - Your sign package has been authorized for a self-certification inspection. (8 or less signs, and all attached to a building) Either schedule 09830 as a remote video inspection by leaving your date desired, and then include in the message your phone number and email address OR Email PDSDsigninspections@tucsonaz.gov pictures of the following items to conduct the self-certification inspection: Elevation view of installed signs to match approved plans Angled pic of sign lettering to contain the UL sticker in install sticker Shut off switch labeled breaker panel - clearly ID signs, ID business location in pic breaker panel switches in "on" position for signs Pic of timer - ID shut off time set to, and ID business location in pic Note that a lock out may be required, depending on location of shut off and location of sign. 3. OLC: see above note for self-cert inspection on what information is to be provided for the central timer. 4. IBC: No comments 5. Addressing - courtesy FYI from Tucson Fire - addressing will have to be 15" tall at this location due to building setback from the curb. Revised plans can be sent to Heather.Thrall@tucsonaz.gov
08/31/2021 COT - ENGR - Signage Final Hthrall Continued Entered by HTHRALL1 - Your sign package has been authorized for a self-certification inspection. (8 or less signs, and all attached to a building) Either schedule 09830 as a remote video inspection by leaving your date desired, and then include in the message your phone number and email address OR Email PDSDsigninspections@tucsonaz.gov pictures of the following items to conduct the self-certification inspection: Elevation view of installed signs to match approved plans Angled pic of sign lettering to contain the UL sticker in install sticker Shut off switch labeled breaker panel - clearly ID signs, ID business location in pic breaker panel switches in "on" position for signs Pic of timer - ID shut off time set to, and ID business location in pic Note that a lock out may be required, depending on location of shut off and location of sign.