Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Passed
Inspection History: COT - ENGR - Signage Final
Permit Number - T21OT00442
Inspection Description - COT - ENGR - Signage Final
Inspection Status - Passed
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 08/10/2021 | COT - ENGR - Signage Final | Hthrall | Approved | Entered by HTHRALL1 - Revised plans approved, along with approval notice from Diamond Ventures. |
| 06/09/2021 | COT - ENGR - Signage Final | HThrall | Partial Approval | Entered by HTHRALL1 - RE: sign review For: wall signage AT: 9260 S Houghton Road, Walmart Super Center (at Houghton Town Center) Permit: T21OT00442 Reviewer: H. Thrall Date: 6/9/2021 Permit status: Partial Approval Codes: Unified Development Code 7A Sign Standards (UDC), National Electrical Code (NEC), Tucson Pima County Outdoor Lighting Code (OLC), International Building Code (IBC) 1) Be advised there is a variance case on this premise, S-08-22 and developer permission is required for sign permitting to fall within the major anchor ratio maximum of 1.25 square feet of sign area per each linear foot of building frontage. Letter received is from Walmart Corporation, please consult developer for permission letter. 2) UDC A) Noted the total sign area on the submitted plans is within variance case S-08-22 ratio of 1.25 square feet of sign area per each foot of linear building frontage - no cap. (nearly 250 square feet sign area proposed, with frontage listed at 388') 3) NEC / OLC A) Just provide note signs will be UL (or equivalent) B) (FYI, UL and installer stickers have to be on the signs for final inspection.) 4) IBC A) Sign E is missing the "face" of the sign on the side view. B) Add arrow for anchors note to the diagram for both Sign A and Sign E Send revisions and additional developer's permission letter to Heather.Thrall@tucsonaz.gov (copy of variance case decision letter sent to contractor as courtesy) |
| 08/12/2021 | COT - ENGR - Signage Final | Hthrall | Continued | Entered by HTHRALL1 - Your sign package has been authorized for a self-certification inspection. (8 or less signs, and all attached to a building) Either schedule 09830 as a remote video inspection by leaving your date desired, and then include in the message your phone number and email address OR Email PDSDsigninspections@tucsonaz.gov pictures of the following items to conduct the self-certification inspection: Elevation view of installed signs to match approved plans Angled pic of sign lettering to contain the UL sticker in install sticker Shut off switch labeled breaker panel - clearly ID signs, ID business location in pic breaker panel switches in "on" position for signs Pic of timer - ID shut off time set to, and ID business location in pic Note that a lock out may be required, depending on location of shut off and location of sign. If you have any questions - contact Heather.Thrall@tucsonaz.gov |