Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: SIGN SITE REVIEW
Permit Number - T20OT00532
Inspection Description - SIGN SITE REVIEW
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 08/28/2020 | SIGN SITE REVIEW | Approved | ||
| 08/26/2020 | SIGN SITE REVIEW | Continued | REVISION RECEIVED ON 08/26/2020 FOR T20OT00532 / MONUMENT SIGN & WALL SIGNS | |
| 08/17/2020 | SIGN SITE REVIEW | Partial Approval | RE: sign review (wall signs and monument) For: Texas Instruments Site: 301 S Williams Blvd Zoning: PAD-1 zone Sign District: Planned Area Development - underlying commercial Reviewer: H. Thrall Date: 08/03/2020 Contractor was emailed / asked to provide: A ) shut off switches labeled on the wall signs. B ) standard ASA on the monument sign, as it's over 80 square feet surface area - footer size to match. Will mount, other than thru pipe, match ASA? C ) total sign area of the monument - dimension sign face - not to exceed 50 sqft |
|
| 08/13/2020 | SIGN SITE REVIEW | Continued | Revision received 08/13/2020 for T20OT00532 / Texas Instrument signage. | |
| 08/03/2020 | SIGN SITE REVIEW | Continued | RE: sign review (wall signs and monument) For: Texas Instruments Site: 301 S Williams Blvd Zoning: PAD-1 zone Sign District: Planned Area Development - underlying commercial Reviewer: H. Thrall Date: 08/03/2020 Codes: Unified Development Code (UDC), National Electrical Code (NEC), Outdoor Lighting Code (OLC), International Building Code 2018 (IBC) 1) PAD-1 zoning document permits only monument signs. Revamp plans and application to ensure all references are for monument type freestanding sign only. On plan provided, revise to state "stand- alone site". 2) The contractor has been sent a copy of sheet 4 of development package DP18-0301, which shows the sight visibility triangles to be used for this site development. Please correct the SVTs shown on the plan set to match the approved DP sheet 4. 3) The minimum setback for a monument sign is 20' from face of curb, show on scaled plan (the SVT is shown at 14' deep, but sign setback near that is listed at 27' - double check all measurements. 4) PAD-1 sign criteria - requires that the PAD architechtural review board provide approval for the sign. (contact property management) 5) Provide dimensions to the wall sign components (allowed sign area is fine, keep the sign area) 6) Notes indicate additnal mounting details for wall signs are provided on another sheet - sheet missing. 7) Regarding electrical: Clearly note the volts, amps, circuits for each sign, and label the shut off switch. 8) Label the "disconnect switch" clearly for the sign. The note provided is not completely clear. 9) Note how cabinet is mounted to the base (i.e brackets mentioned - i.e. j-bolts? what?) 10) Outdoor lighting code met, just clarify in notes "timer to provide shut off by midnight curfew". 11) Further review comments may be forthcoming, depending on responses provided. Email revision to Heather.Thrall@tucsonaz.gov |