Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO.
If you cannot find what you are looking for please
submit a records request.
Inspection Status: Not Ready
Inspection History: COT - ENGR - Signage Final
| Date |
Description |
Inspector |
Results |
Comments |
| 10/27/2022 |
COT - ENGR - Signage Final |
|
Not Ready |
|
| 09/13/2019 |
COT - ENGR - Signage Final |
ACONNOR |
Approved |
Entered by ACONNOR1 - TOTAL $591.82 |
| 08/23/2019 |
COT - ENGR - Signage Final |
ACONNOR |
Correction Required |
Entered by ACONNOR1 - Monument type sign, general requirements:Maximum faces: Four per sign,Maximum area: 50 feet per face.Maximum height: Ten feet from grade.Minimum setback: 20 from curb to leading edge of sign.
Sign G is a monument sign and the maximum height is 10' tall. It's indicated as 10.75' on application and drawings.
Submit a site plan indicating the setback and Sight Visibility Triangles.
Revise as necessary or apply for an SSDO. |
| 08/16/2019 |
COT - ENGR - Signage Final |
ACONNOR |
Correction Required |
Entered by ACONNOR1 - ARTICLE 7A: SIGN STANDARDS
7A.4.1. PERMITS
For ease of review and retention of plans:
Include one sheet keyed with application for each sign with elevation drawing, electrical details and for directional signs footing details.
Engineering and construction detail are only needed for the following:
All detached sign structures exceeding 60 square feet in area.
Remove unnecessary sheets from submittal.
Revise submittal for review.
Additional comments may apply.
|